N5222A Microwave Vector Network Analyzer 10MHz-26.5GHz with 132 dB Dynamic Range and 500,000 Points/s Speed
Price:
Negotiable
MOQ:
1 set
Delivery Time:
1~3 Working Days
Brand:
Keysight (Agilent)
Product Description
Test Equipment N5222A Microwave Or Vector Network Analyzer 10MHz-26.5GHz
Key Features & Specifications
- 10 MHz to 26.5 GHz frequency range
- 2-ports with single source or 4-ports with two built-in sources
- 127 dB system and 132 dB receiver dynamic range, 32,001 points, 200 channels, 15 MHz IF bandwidth
- High output power (+13 dBm) and wide power sweep range (38 dB)
- Best dynamic accuracy: 0.1 dB compression with +12 dBm input power at test port
- Low noise floor of -114 dBm at 10 Hz IF bandwidth
Product Overview
The PNA Series is the highest-performing microwave network analyzer in the industry for passive and active device testing. Choose from five frequency models (13.5, 26.5, 43.5, 50, or 67 GHz) and customize your PNA with the precise performance level to meet your specific budget and measurement requirements.
The Agilent PNA tests a wide variety of passive and active devices including filters, duplexers, amplifiers, and frequency converters. Its high-performance characteristics make it ideal for component characterization, millimeter-wave, signal integrity, and materials measurements.
The PNA Series provides high-power sources and superior linear receivers, delivering the most accurate S-parameter measurements with the widest power range available.
Overview and Features
- Unrivaled excellence in measurements and designs
- Transform deeper understanding into better designs with outstanding measurement integrity
- Meet toughest measurement challenges with industry's highest performing microwave network analyzer
- Best accuracy with Keysight's S-parameter measurements
- Customize to exact performance level for specific budget and measurement needs
What's Included
- Plug, hole, bottom foot
- Installation and quick start guide
- Safety manual
- Calibration certificate
- 3 Inductors (ferrite cores)
- Wrench
- Cable tie
- Optical Mouse
Applications
- S-parameters (CW and pulsed)
- Noise figure
- Gain compression
- Intermodulation and harmonic distortion
- Conversion gain/loss
- True-differential stimulus
- Millimeter-wave
- Material measurements
- Signal integrity
- Antenna test
Available Options
| Option Code | Description |
|---|---|
| 007 | Automatic Fixture Removal |
| 008 | Pulsed-RF Measurements |
| 010 | Time Domain |
| 015 | Dynamic Uncertainty for S-Parameter Measurements |
| 020 | Add IF inputs |
| 021 | Add pulse modulator to internal first source |
| 022 | Add pulse modulator to internal second source |
| 025 | Add four internal pulse generators |
| 028 | Noise figure measurements using standard receivers |
| 080 | Frequency-Offset (for use with mixers, converters and amplifiers) |
| 082 | Scalar calibrated converter measurements |
| 083 | Vector and scalar calibrated converter measurements |
| 084 | Embedded LO measurements |
| 086 | Gain compression application |
| 087 | Intermodulation distortion measurements |
| 088 | Source phase control |
| 089 | Differential and I/Q devices application |
| 090 | Spectrum Analyzer |
| 093 | Extended Spectrum Analyzer to 110 GHz |
| 094 | Extended Spectrum Analyzer above 110 GHz |
| 118 | Fast CW Mode |
| 200 | 2 ports, single source, base hardware configuration |
| 201 | 2-Ports, Single Source with Configurable Test Set |
| 210 | 2 ports, single source, with metrology configuration |
| 217 | 2-Ports, Single Source, Configurable Test Set with Extended Power Range |
| 219 | 2-Ports, Single Source, Configurable Test Set, Extended Power Range, Bias-Tees |
| 301 | Application for use with standard CalPods |
| 302 | Application for use with temperature-characterized CalPods |
| 400 | 4-Ports, Dual-Source, Base Configuration |
| 401 | 4-Ports, Dual-Source with Configurable Test Set |
| 417 | 4-Ports, Dual-Source, Configurable Test Set with Extended Power Range |
| 419 | 4-Ports, Dual-Source, Configurable Test Set, Bias Tees with Extended Power Range |
| 460 | Integrated true-mode stimulus application |
| 551 | N-port calibrated measurements |
| 897 | Built-in performance test software for inclusive calibration, perpetual license |
| 898 | Built-in performance test software for standards compliant calibration, perpetual license |
| W7X | Windows 7 operating system |
| WXP | Windows XP operating system |
Support and Services
- One-stop service from manufacture to shipping
- Inquiries responded within 24 hours
- Well-trained English-speaking staff
- Distributor support for unique designs and current models
- Protection of sales area, design ideas, and private information
- 30-day warranty
Frequently Asked Questions
Can you ship orders to Canada or Australia?
Yes, we ship orders worldwide.
What delivery methods do you use and what is the delivery time?
We ship by EMS, DHL, FedEx, UPS, TNT with tracking numbers. Delivery time is typically 4-7 business days.
What is your payment term?
100% T/T payment before shipment.
How can I ask any other questions?
You can contact us online or leave messages below.
Product Images
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Meigaolan Electronic Instrument Co. Ltd
Location
RA1-B2,F32 of Dongjianghaoyuan, Baomin Rd, Bao'an District, Shenzhen,China
Contact Person
Dannie