Portable Keysight FieldFox Handheld Signal Analyzer with 26.5 GHz Frequency 120 MHz Real-Time Bandwidth and GPS/GNSS Geolocation
Price:
Negotiable
MOQ:
1 set
Delivery Time:
Negotiable
Brand:
Keysight
Product Description
Portable Keysight Agilent N9918B FieldFox Handheld Signal Analyzer 26.5 GHz
Product Overview
Portable Keysight (Agilent) N9918B FieldFox Handheld Signal Analyzer, 26.5GHz
- 26.5 GHz max frequency
- Cable and Antenna Analyzer (CAT) included in standard models
- The 120 MHz gap-free real-time bandwidth enables you to capture signals that were previously difficult to capture
- The 115 dB dynamic range enables you to measure all four S-parameters simultaneously
- Accurate spectrum analyzer measurements (± 0.3dB) without preheating
- Air interface measurements for 5G NR and LTE can be performed
- Provides geolocation and time stamp using GPS/GNSS
- Weighing just 3.4 kg (7.4 lb), it is very portable
Technical Specifications
| Maximum Frequency | 26.5 GHz |
| Other CAT/VNA Features | Mixed-Mode S-Parameters, DTF/TDR Cable Measurements, Vector Voltmeter |
| Applications | AM/FM Tune and Listen, Cable and Antenna Analysis, Field Strength Measurement, SCPI Code Compatibility, Spectrogram, Stimulus Response, 89600 VSA Software, Over-The-Air LTE FDD and 5GTF 5G NR |
| Best Speed at 1001 Point, 1 Sweep | 171 us/pt |
| SA Start Frequency | 5 kHz |
| System Dynamic Range | > 114 dB |
| Additional Spectrum Analyzer Features | Real-Time Spectrum Analysis, Noise Figure Measurements, Over-The-Air Measurements, Built-In Power Meter, Extended Range Transmission Analysis (ERTA) |
| Output Power | 8 dBm |
| Number of Built-In Ports | 2 ports |
| Instrument Type | Combination Analyzer |
| Cable and Antenna Analyzer | Yes - Standard |
| Spectrum Analyzer | Yes - Optional |
| Vector Network Analyzer | Yes - Optional |
| Measuring Functions | Network analysis, Signal analysis, Cable and antenna tester, Real-time spectrum analysis |
| Overall Amplitude Accuracy | ±0.2 dB |
| Type | Handheld |
| System Features | GPS Receiver - Internal Only, Remote Control Capability, Built-In DC Source |
| Standard Attenuator Range | 40 dB |
| Standard Attenuator Step | 5 dB |
| DANL @1 GHz | -163 dBm |
| Maximum Analysis Bandwidth | 120MHz |
| Maximum Real-Time Bandwidth | 120MHz |
| Phase Noise @1 GHz (1 MHz offset) | -124dBc/Hz |
| Phase Noise @1 GHz (10 kHz offset) | -117 dBc/Hz |
| Phase Noise @1 GHz (30 kHz offset) | -115 dBc/Hz |
| TOI @1 GHz (3rd Order Intercept) | +11dBM |
| Bandwidth | 110 MHz |
| Bandwidth Options | 10 MHz, 40 MHz, 120 MHz |
| CAT/VNA Start Frequency | 30 kHz |
| Track Noise | 0.0008 dB rms |
Available Options
| Option Code | Description |
|---|---|
| 010 | Vector network analyzer time domain |
| 030 | Remote Control Capability |
| 208 | USB Power Sensor Measurements Versus Frequency |
| 209 | Extended Range Transmission Analysis (ERTA) |
| 211 | Vector network analyzer full 2-port S-parameters |
| 212 | 1-port mixed-mode S-parameters |
| 215 | TDR cable measurements |
| 233 | Spectrum analyzer |
| 235 | Pre-amplifier |
| 236 | Interference analyzer and spectrogram |
| 238 | Spectrum Analyzer Time Gating |
| 302 | USB power sensor support |
| 307 | GPS Receiver |
| 308 | Vector voltmeter |
| 309 | DC Bias Variable Voltage Source |
| 310 | Built-in Power Meter |
| 312 | Channel Scanner |
| 320 | Reflection measurements (return loss, VSWR and scalar measurements) |
| 330 | Pulse Measurements |
| 350 | Real-time Spectrum Analyzer (RTSA) |
| 351 | I/Q Analyzer (IQA) |
| 355 | Analog Demodulation |
| 356 | Noise Figure measurements |
| 370 | Over the air LTE FDD measurements |
| 377 | Over the air 5G TF measurements |
| 378 | Over-the-air (OTA) 5G NR measurements |
| 352 | Indoor and outdoor mapping |
| 358 | EMF measurements |
| 371 | Over the air LTE TDD measurements |
| 361 | EMI measurements |
| 353 | IQ streaming |
| 1A7 | Calibration + Uncertainties + Guardbanding (Not Accredited) |
| A6J | ANSI Z540-1-1994 Calibration |
| UK6 | Commercial calibration certificate with test data |
| B04 | Bandwidth, 40 MHz |
| B10 | Bandwidth, 100 MHz |
Frequently Asked Questions
1. Can you ship orders to Canada or Australia?
Yes, we can. We send orders worldwide.
2. What delivery method do you use and what is the delivery time?
We can ship by EMS, DHL, FedEx, UPS, TNT with tracking number. Usual delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question?
You can contact us online or leave us messages below.
Product Images
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Meigaolan Electronic Instrument Co. Ltd
Location
RA1-B2,F32 of Dongjianghaoyuan, Baomin Rd, Bao'an District, Shenzhen,China
Contact Person
Dannie