Keysight N9917A FieldFox Handheld Analyzer 18 GHz with 2 Ports and 91 dB Dynamic Range
Keysight's FieldFox portable analyzers are equipped to handle your toughest working environments during routine maintenance, in-depth troubleshooting, and anything in between. Choose the Keysight FieldFox configuration that best meets your needs.
Measuring up and earning a spot in your field kit is the driving idea behind Keysight's FieldFox handheld analyzers. They're equipped to handle routine maintenance, in-depth troubleshooting and anything in between. Better yet, FieldFox delivers precise microwave and millimeter-wave measurements - wherever you need to go.
- Measure with confidence - precise measurements agree with benchtop results
- Withstands your toughest working environments - rugged enough to meet MIL-specs
- Weighs less than alternative solutions - 7.1 lb (3.2 kg)
With FieldFox, you're carrying the precision of our industry-standard benchtop analyzers. By delivering levels of consistency not available in any other handhelds, FieldFox ensures confidence in your results.
Inside, we leveraged well-tested algorithms from Keysight's high-performance VNAs. To lighten your load, we simplified calibration by adding built-in standards and eliminating the need to carry calibration kits.
To enhance spectrum analysis, FieldFox includes the same PowerSuite measurements used in Keysight signal analyzers, enabling fast, accurate, one-button characterization of channelized communication systems. The InstAlign capability lets you instantly make accurate power measurements in the field, even when temperature fluctuates.
- Standard model includes cable and antenna analyzer
- Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
- Save time by measuring DTF and TDR in the same sweep
- Measure all four S-parameters simultaneously
- Make accurate spectrum analyzer measurements (± 0.5 dB) without warm-up
- Calibrate easily with QuickCal
- Use the industry's lightest all-in-one analyzer at only 3.0 kg (6.6 lb)
- S-Parameters
- Distance-To-Fault
- Cable Trimming
- Return Loss
- Insertion Loss/Gain
- Interference Analysis
- Power Measurements
- Cables
- Antennas
- Amplifiers
- Filters
- 75 Ohm CATV Devices
CAT/VNA Based Features: QuickCal (Subset), Vector Voltmeter, Mixed-Mode S-Parameters, TDR Cable Measurements
SA Based Features: Built-In Power Meter, Extended Range Transmission Analysis (ERTA)
System Features: Built-In DC Source, GPS Receiver - Internal and External
| Standard Attenuator Range | 30 dB |
| Standard Attenuator Step | 5 dB |
| DANL @1 GHz | -155 dBm |
| Phase Noise @1 GHz (1 MHz offset) | -113 dBc/Hz |
| Phase Noise @1 GHz (10 kHz offset) | -111 dBc/Hz |
| Phase Noise @1 GHz (30 kHz offset) | -110 dBc/Hz |
| TOI @1 GHz (3rd Order Intercept) | +15 dBm |
| Frequency | 5 kHz to 18 GHz |
| Overall Amplitude Accuracy | ±0.5 dB |
| Bandwidth Options | 5 MHz |
| Frequency Options | 18 GHz |
| Option Code | Description |
|---|---|
| 010 | Vector Network Analyzer Time Domain |
| 210 | Vector Network Analyzer Transmission/Reflection |
| 211 | Vector Network Analyzer Full 2-port S-parameters |
| 215 | TDR Cable Measurements |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.