Pre-Owned R&S ESL6 EMI Test Receiver with Touchscreen for EMC Compliance Testing and Spectrum Analysis (9 kHz to 6 GHz)
The R&S®ESL EMI test receiver combines two instruments to not only measure EMC interference according to relevant standards, but can also be used as a full-featured spectrum analyzer for a wide range of laboratory applications. The receiver combines excellent RF characteristics and all important functions to quickly and accurately measure and evaluate the EMC of the equipment under test according to commercial standards, making it unique in its class. The R&S®ESL features a wide range of analytical capabilities, fast measurement speeds, and time-saving automated test sequences, making it ideal for any development lab with a small budget that needs to perform EMC certification testing.
- 0.5dB amplitude accuracy
- 1dB compression point: +5dBm
- RF input pulse resistance up to 10mWs
- Display average noise level with preamplifier: <-152 dBm (1 Hz)
- Resolution bandwidth: 10 Hz to 10 MHz (-3 dB), 200 Hz, 9 kHz, 120 kHz (-6 dB), 1MHz (pulse)
- Two test instruments are integrated into one: an EMI test receiver and a spectrum analyzer
- Low investment cost
- Best in class RF characteristics for specific instruments
- Provides rich measurement and evaluation functions
- Options are plug-and-play, reducing costs
| Option Code | Description |
|---|---|
| C3 | Three years of standard calibration coverage based on the R&S recommended calibration interval - includes test data. |
| C5 | Five years of standard calibration coverage based on the R&S recommended calibration interval - includes test data. |
| DCV-ZP | Printout of DCV (additional, in combination with DCV-Option only) |
| FSL-B10 | GPIB interface |
| FSL-B22 | RF preamplifier, gain 20 dB (software license) |
| FSL-B30 | DC power supply 12 - 28 V |
| FSL-B31 | NiMH battery pack |
| FSL-B4 | OCXO reference frequency |
| FSL-B5 | Additional interfaces video/IF-output, power meter 28 V - DC for noise source |
| FSL-B8 | Gated sweep function (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) (software license) |
| FSL-K30 | Application firmware for noise figure and gain measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| FSL-K7 | Analogue demodulation AM/FM/PM (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) (software license) |
| FSL-K9 | Power sensor measurements with NRP (software license) |
| R3 | Three years of depot repair coverage, including standard recalibration and test data if necessary to complete the repair. |
| R5 | Five years of depot repair coverage, including standard recalibration and test data if necessary to complete the repair. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.