Fluke 117/323 Electricians Combo Kit with True-RMS Digital Multimeter and 600 V CAT III Clamp Meter featuring Non-contact Voltage Detection
Having the right tools for the job is essential. Having them when you need them is even better. Arrive on every jobsite prepared with the Fluke 117/323 electricians multimeter and clamp meter combo kit. The two test tools give you the power of a versatile, rugged multimeter combined with a fast-acting, general-purpose clamp meter.
Whether you work in residential electricity or commercial electrical, both of these test tools are a good fit for the work you need to complete.
- Fluke 117 digital multimeter
- Fluke 323 clamp meter
- Tl175 test leads
- TPAK ToolPak magnetic meter hanger
- Soft carrying case
The Fluke 117 digital multimeter is built to make your life easier with features like:
- Non-contact voltage detection
- AutoV/LoZ function
- Min/Max/Average readings
- Frequency measurements
- Capacitance measurements
In order to ensure you're ready to go on many jobsites, the 117 is certified for use in CAT III 600 V environments.
The Fluke 323 clamp meter is a good basic troubleshooting tool for commercial and residential electricians. It includes true RMS measurements, optimized ergonomics and a large display for efficient troubleshooting. The small clamp is designed to make measurements in tight cable compartments easier on you and it's ideally suited for current measurements up to 400 A or voltage measurements up to 600 V.
Together, the Fluke 117 Electrician's Multimeter and 323 True-RMS Clamp Meter give electricians easy to use, time-saving tools for your work.
| Maximum voltage between any terminal and earth ground | 600 V |
| Surge protection | 6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2 |
| Fuse for A input | 11 A, 1000 V FAST Fuse (Fluke PN 803293) |
| Display | Digital: 6,000 counts, updates 4 per second |
| Bar graph | 33 segments, updates 32 per second |
| Operating temperature | -10 °C to +50 °C |
| Storage temperature | -40 °C to +60 °C |
| Battery type | 9 volt Alkaline, NEDA 1604A/ IEC 6LR61 |
| Battery life | 400 hours typical, without backlight |
| Measurement | Range/Resolution | Accuracy |
|---|---|---|
| DC millivolts | 600.0 mV / 0.1 mV | ±(0.5% + 2) |
| DC volts | 6.000 V / 0.001 V 60.00 V / 0.01 V 600.00 V / 0.1 V |
±(0.5% + 2) |
| Auto volts | 600.0 V / 0.1 V | 2.0% + 3 (DC, 45 Hz to 500 Hz) 4.0% + 3 (500 Hz to 1 kHz) |
| AC millivolts¹ True RMS | 600.0 mV / 0.1 mV | 1.0% + 3 (DC, 45 Hz to 500 Hz) 2.0% + 3 (500 Hz to 1 kHz) |
| AC volts¹ True RMS | 6.000 V / 0.001 V 60.00 V / 0.01 V 600.0 V / 0.1 V |
1.0% + 3 (DC, 45 Hz to 500 Hz) 2.0% + 3 (500 Hz to 1 kHz) |
| Continuity | 600 Ω / 1 Ω | Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer |
| Ohms | 600.0 Ω / 0.1 Ω 6.000 kΩ / 0.001 kΩ 60.00 kΩ / 0.01 kΩ 600.0 kΩ / 0.1 kΩ 6.000 MΩ / 0.001 MΩ |
0.9% + 1 |
| Ohms (continued) | 40.00 MΩ / 0.01 MΩ | 5% + 2 |
| Diode test | 2.00 V / 0.001 V | 0.9% + 2 |
| Capacitance | 1000 nF / 1 nF 10.00 μF / 0.01 μF 100.0 μF / 0.1 μF 9999 μF / 1 μF 100 μF to 1000 μF |
1.9% + 2 |
| Capacitance (continued) | > 1000 μF | 5% + 20% |
| Lo-Z capacitance | 1 nF to 500 μF | 10% + 2 typical |
| AC amps True RMS (45 Hz to 500 Hz) | 6.000 A / 0.1 A 10.00 A / 0.01 A |
1.5% + 3 20 A continuous overload for 30 seconds max |
| DC amps | 6.000 A / 0.1 A 10.00 A / 0.01 A |
1.0% + 3 20 A continuous overload for 30 seconds max |
| Hz (V or A input)² | 99.99 Hz / 0.01 Hz 999.99 Hz / 0.1 Hz 9.999 Hz / 0.001 Hz 50.00 Hz / 0.01 Hz |
0.1% + 2 |
| Specification | Details |
|---|---|
| AC current | Range: 400.0 A Accuracy: 2% ±5 digits (45 Hz to 65 Hz) 2.5% ±5 digits (65 Hz to 400 Hz) |
| AC voltage | Range: 600.0 V Accuracy: 1.5% ±5 digits |
| DC voltage | Range: 600.0 V Accuracy: 1.0% ±5 digits |
| Resistance | Range/Resolution: 400.0 Ω/ 4000 Ω Accuracy: 1.0% ±5 digits |
| Continuity | ≤ 70 Ω |
| AC response | True RMS |
| Data hold | Yes |
| Size | H x W x D (mm): 207 x 75 x 34 |
| Max wire diameter | 30 mm (600 MCM) |
| Weight | 265 g |
| Category rating | CAT III 600 V CAT IV 300 V |
| Warranty | Two-year |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.