Rohde & Schwarz ZVA40 10MHz to 40GHz Benchtop Vector Network Analyzer with MFG Calibration
Price:
Negotiation
MOQ:
1 set
Delivery Time:
1~3 Working Days
Brand:
Rohde and Schwarz
Product Description
Rohde & Schwarz ZVA40 10MHz To 40GHz Vector Network Analyzer W/ MFG Calibration!
Product Overview
The Rohde & Schwarz ZVA40 Vector Network Analyzer offers exceptional performance for demanding measurement applications with a frequency range of 10MHz to 40GHz. This unit includes manufacturer calibration for guaranteed accuracy.
Key Features
- Linear and nonlinear amplifier and mixer measurements
- Noise figure measurements
- Pulse profile measurements with 12.5 ns resolution
- Wide IF bandwidth
- Phase and group delay measurements on mixers with and without LO access
- Wide dynamic range typical > 140 dB
- High output power typical > 15 dBm
- Versatile calibration techniques: TOSM, TRL/LRL, TOM, TRM, TNA, UOSM
- Easy and error-free calibration
- Quick and reliable measurements
- Precision and Flexibility
Available Options
| Option Code | Description |
|---|---|
| B-B18 | Removable Flash Disk 4GB for ZVA/ZVB with control unit FMR6/5 (factory installed only) |
| B-B18 | Removable Flash Disk 4GB for ZVA/ZVB with controller unit FMR7/3 or FMR7/6 |
| B-B18 | Removable hard disk 160GB (including firmware) for R&S® ZVA and R&S® ZVB with FMR7 |
| B-B4 | Oven quartz (OCXO) for ZVA, ZVB, ZVT |
| B-K2 | Time domain (for ZVA, ZVB, ZVT) (software license) |
| B-K30 | Noise figure measurement on 2 port devices (for ZVA and ZVT) |
| B16 | Direct Generator and Receiver Access for 2 Ports |
| B18 | Removable Flash Disc |
| B21 | Generator Step Attenuator Port 1; mechanical, 70dB in 10dB-steps |
| B22 | Generator Step Attenuator Port 2; mechanical, 70dB in 10dB-steps |
| B23 | Generator Step Attenuator Port 3; mechanical, 70dB in 10dB-steps, 40 GHz |
| B24 | Generator Step Attenuator Port 4; mechanical, 70dB in 10dB-steps, 40 GHz |
| B31 | Receiver Step Attenuator Port 1; mechanical, 35dB in 5dB-steps |
| B32 | Receiver Step Attenuator Port 2; mechanical, 35dB in 5dB-steps |
| B33 | Receiver Step Attenuator Port 3; mechanical, 35dB in 5dB-steps, 40GHz |
| B34 | Receiver Step Attenuator Port 4; mechanical, 35dB in 5dB-steps, 40GHz |
| B7 | Measurements on pulsed signals. Pulse Profile, Recording time up to 25ms, up to 30MHz bandwidth |
| B8 | External attenuator control. Control unit for electronic attenuators of ZVAZ90E, ZVA-Z110E |
| C3 | Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data |
| C5 | Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data |
| DCV-2 | Documentation of calibration values |
| DCV-ZP | Printout of DCV (additional, in combination with DCV-Option only) |
| K10 | Group delay measurement on converters without LO access. For long distances via LXI network of 2 ZVA or ZVT |
| K17 | Increases the receiver bandwidth to 5MHz (software license) |
| K2 | Time domain (for ZVA, ZVB, ZVT) |
| K27 | Two internal pulse generators (for ZVA and ZVT) (software license) |
| K4 | Mixer- and frequency converting measurements for ZVA and ZVT (software license) |
| K5 | Vector corrected mixer measurements (for R&S®ZVA, R&S®ZVT; R&S®ZVA/T-B16 and R&S®ZVA-K4 required) |
| K6 | True Differential Measurements for all 4-port ZVA and for ZVT with at least 3 ports |
| K7 | Measurements on pulsed signals pulse profile, recording time up to 3ms up to 30 MHz bandwidth |
| K8 | Control of frequency converters (for ZVA with f>20 GHz, ZVT20, includes ZVA-K4) |
| K9 | Measurement of group delay on frequency converters without LO access (for ZVA, ZVT) |
| R3 | Three years of depot repair coverage, including re-calibration if necessary to complete the repair |
| R5 | Five years of depot repair coverage, including re-calibration if necessary to complete the repair |
Our Service Commitment
- One-stop service from manufacture to shipping
- Your inquiry related to our products or prices will be replied in 24 hours
- Well-trained and experienced staff to answer all your enquiries in fluent English
- Distributor ship is offered for your unique design and some our current models
- Protection of your sales area, ideas of design and all your private information
Frequently Asked Questions
Can you ship order to Canada or Australia?
Yes, we can. We send orders worldwide.
What delivery method do you use and delivery time?
We can ship by EMS, DHL, FedEx, UPS, TNT with tracking number. Usual delivery time is 4-7 workdays.
What is your payment term?
100% T/T payment before shipment.
How can I ask any other question?
You can contact us online or leave us messages below.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Meigaolan Electronic Instrument Co. Ltd
Location
RA1-B2,F32 of Dongjianghaoyuan, Baomin Rd, Bao'an District, Shenzhen,China
Contact Person
Dannie