Anritsu S331L Rugged Handheld Cable and Antenna Analyzer with 2 MHz to 4 GHz Spectrum Analyzer and Long Battery Operating Time
The S331L is a rugged, handheld cable and antenna analyzer optimized for field conditions. Utilizing the latest advancements in technology, the S331L features efficient sweep management capabilities and delivers an entire workday of battery operating time. With its large outdoor-viewable 7" TFT touch screen display, intuitive GUI, and classic mode, the S331L significantly increases user efficiency in the field.
- Return Loss
- VSWR
- Cable Loss
- Smith Chart (50/75 ohm selectable)
- 1-port Phase
- Distance-to-Fault Return Loss
- Distance-to-Fault VSWR
- RF Power (50 MHz to 4 GHz)
- VIP Mode; Optical connector inspection with IEC 61300-3-35 based Pass/Fail standard (requires USB Video Inspection Probe G0306A, sold separately)
The S331L represents the highest value in rugged, handheld cable and antenna analyzers, replacing the S331D value line. It offers the most battery operating time ever provided in a handheld cable and antenna analyzer, along with a large outdoor-viewable display and user-friendly interface that mimics the S331D basic measurement flow.
| Parameter | Specification |
|---|---|
| Interference Immunity - On-Channel | +17 dBm outside calibrated sweep range |
| Interference Immunity - On-Frequency | +13 dBm within calibrated sweep range |
| Return Loss Measurement Range | 0 dB to 60 dB |
| Return Loss Resolution | 0.01 dB |
| VSWR Measurement Range | 1:1 to 65:1 |
| VSWR Resolution | 0.01 |
| Distance-to-Fault Vertical Range (Return Loss) | 0 dB to 60 dB |
| Distance-to-Fault Vertical Range (VSWR) | 1:1 to 65:1 |
| 1-Port Phase Measurement Range | -180° to +180° |
| Frequency Range | 2 MHz to 4 GHz |
| Frequency Accuracy | +/- 5ppm @ 23° C +/- 3° C |
| Frequency Resolution | 1 kHz (RF immunity low), 100 kHz (RF immunity high) |
| Output Power - High | 0 dBm, typical |
| Output Power - Low | -30 dBm, typical |
| Cable Loss Measurement Range | 0 dB to 30 dB |
| Cable Loss Resolution | 0.01 dB |
| Power Output | -3 dBm, typical |
| Weight | 4.4 lbs |
| Warranty | 1 Year |
The S331L is an all-inclusive instrument with a built-in InstaCal™/Power Meter module. The unit arrives fully capable of measuring:
- VSWR
- Return Loss
- Cable Loss
- Distance-To-Fault VSWR
- Distance-To-Fault Return Loss
- RF Power
No options are required to perform these measurements, however a test port cable is required to complete calibration(s). Please refer to the brochure or datasheet for additional accessories such as phase stable test port cables or hard transit cases.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.