400mm Diameter Rubber Mill Mixer 37Kw Two Roll Mixing Mill
Rubber Mixing Mill Machine Rubber Mixer
| Type | XK-160 | XK-230 | XK-250 | XK-300 | XK- 360 | XK-400 | XK-450 | XK-560 | XK-550B | XK-660 |
| Working diameter of rolls (mm) | 160 | 230 | 250 | 300 | 360 | 400 | 450 | 560/510 | 550 | 660 |
| Working Length of rolls (mm) | 320 | 600 | 620 | 750 | 900 | 1000 | 1200 | 1530 | 1500 | 2130 |
| Front roll surface speed (m/min) | 8.95 | 10.21 | 14.1 | 15.1 | 16.25 | 18.65 | 24.26 | 27.72 | 27.94 | 28.6 |
| Friction ratio | 1:1.35 | 1:1.19 | 1:1.17 | 1:1.25 | 1:1.25 | 1:1.27 | 1:1.27 | 1:1.2 | 1:1.22 | 1:1.24 |
| Max. nip (mm) | 4.5 | 7 | 8 | 10 | 10 | 10 | 15 | 15 | 15 | 15 |
| Capacity per batch (kg) | 1-2 | 6-10 | 8-15 | 15-20 | 20-25 | 18-35 | 25-50 | 35-50 | 50-60 | 165 |
| Motor power (KW) | 5.5 | 15 | 18.5 | 22 | 30 | 37 | 55 | 90 | 110 | 245 |
| Size (L*W*H) (mm) | 1380*850*1320 | 2800*1200*1120 | 3400*1500*1500 | 2450*1500*1550 | 3780*1850*1750 | 4350*1850*1785 | 5200*2380*1840 | 5845*2284*1978 | 5878*2475*2045 | 7465*3662*2080 |
2)Roll bearing and seal: 8pcs double-row cylindrical roller bearing is adopted coupling with 4pcs more thrust bearing, 12pcs bearings for each machine, which could save energy consumption up to 10-15%, lubrication grease is reduced by 20-25%.2sets double-row cylindrical roller bearings for each bearing house.
anneal heating treatment machine frames
7)Bedplate: integral welding structure, made of superior U steel and constructional steel through anneal heating treatment and processing.
8)Stock guider: fixed type
9)Transmission system: complete enclosed drive, through couplings, gear reducer(single input shaft and single output shaft), driving gear and friction gear, main motor drives the two rolls relative rotating at different speed, plasticating, mixing or sheeting could be therefore realized.
10)Roll temperature adjusting device: consisting of superior rotary joints and stainless steel pipe with drilled spraying nozzles.
11)Emergency stop and braking device: energy consumption method is used to stop the mill. There are 3-emergency stop buttons fitted on the frames, press the button if any emergency situation occurs, the roll rotation will not exceed 1/4 circle and main motor reverse 1/4 circle thereafter within 2 seconds. Meanwhile, this mill is fitted with electrical-hydraulic brake system, which improves equipment safety ability significantly. Other safety device such as pulling rope/chest bar, foot pedal, safety protection bar are all available.
12)Stock pan: welded by superior stainless steel plate.
13 )Main motor start up: Star-delta starting.
14) Cutter device: 2pcs manual straight cutter.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.