SWEEPOLET Stainless Steel High Pressure Fittings With SCH120 Wall Thickness

SWEEPOLET Stainless Steel High Pressure Fittings

Product Information

Sweepolets are commonly used in piping systems where a branch connection is required without the need for additional fittings like elbows. They are suitable for various industries, including oil and gas, petrochemical, chemical processing, and power generation.A "Sweepolet" is a type of branch connection fitting used in piping systems, designed to provide a smooth flow transition from the run pipe to the branch pipe. When specified as "Stainless Steel Sweepolet," it indicates that the fitting is made of stainless steel material, offering corrosion resistance and durability.

Stainless Steel Sweepolets are manufactured using stainless steel, known for its excellent corrosion resistance properties. Common stainless steel grades used include 304, 316, and 316L.

Sweepolets have a curved or sweeping outlet that allows for a smooth flow transition from the main pipe to the branch pipe. This design minimizes turbulence and pressure drop in the piping system.

Standards & Materials: ASTM A403

ASTM A403 Stainless Steel Pipe Fittings refers to the material of forged and rolled austenitic stainless fittings for pressure pipes. Common grades are WP304/L, WP316/L. They can be used into many fields as engineering industry, energy conversion plants etc.

ASTM A403 Chemical Compositions (%)

Note:

• Where a ellipsis(﹍)appears in the table, there is no requirement and the element need to be analyzed for or reported
• The method of analysis for nitrogen shall be a matter of agreement between the purchaser and manufacturer
• Columbium 0.10-0.30%; Vanadium 0.10-0.30%.
• For small diameter or thin walls, or both, where many drawing passes are required, a carbon maximum of 0.04% is necessary in grades TP304L and TP316L. Small outside diameter tubes are defined as those less than 0.500in.(23.7mm) in outside diameter and light wall tubes as those less than 0.049in.(1.24mm) in average wall thickness

Dimensions of ASME B16.11 Threaded (THD) Cross (mm)

The drawing of ASME B16.11 forged tee with threaded (THD) ends. A: center-to-end of cross; H: outside diameter of band; G: minimum wall thickness; B: minimum length of perfect thread; L₂: effective length of external thread.