DPJ-100 Single Layer Roll Feeding Cup Lid Forming Machine

DPJ-145 Single Layer Roll Feeding Bowl Lid Forming Machine

DPJ-200 Single Layer Roll Feeding Super Bowl Lid Forming Machine

The electric furnace is divided into two sections: preheating and heating; the forming heating plate is automatically closed and opened, and the start-up can be delayed after the heating plate is put down to limit the waste of materials within one stroke. Due to the use of body-fitting heating, the heating power and temperature are reduced, energy is saved and the stability of the plastic sheet is enhanced.

The automatic single-layer paper lid forming machine is suitable for lids made of coated paper, ice cream cup lids, coffee cup lids, noodle bowl lids, salad bowl lids, etc. It has largely replaced the plastic cover on the market.

The mold is clamped by pressing plate, which is convenient for adjustment and installation.

Using the manipulator to clamp the feeding mechanism, the operation is stable, the synchronization is accurate, and the stroke can be adjusted arbitrarily from 150-230mm;

All parts in contact with the plastic sheet are made of stainless steel or non-toxic materials, in line with "GMP" requirements.

Technical Parameters

Customs code: 8441309000

Paper cover specifications:

height (8-15) mm, DPJ-100/S100 diameter (60 -100) mm, speed: (70-100) pieces per minute.

Height (8-15) mm, DPJ-145/S145 straight strength (100-140) speed: (60-75) per minute.

Height (8-15) mm, DPJ-200/S200 diameter (140 -200) mm, speed: (45-60) pieces/min

Applicable paper: single and double PE/PLA coated paper, coated paper, glazing coated paper (250-480g/m2)

Power: 10kw

Power supply: AC380V 3-phase, 50Hz (can be customized according to customers)

Working air source: air consumption 0.02 cubic meters per minute, working air pressure 0.3MPa

The total weight of the equipment: Cup lid machine .2100KG.

Bowl cover machine.2500KG.

Giant bowl machine 3300KG.