All parts of the cup lid forming machine in contact with the plastic sheet are made of stainless steel or non-toxic materials, in line with GMP requirements.

The main motor of the cup lid forming machine adopts frequency conversion speed regulation: the number of punching times can be adjusted from 10 to 20 times per minute, and the appropriate number of punching times can be set according to the length of the stroke and the difficulty of forming.

The pneumatic system of the cup lid forming machine adopts photoelectric control, programmable through PLC, so that each mechanism can run accurately and ensure the stability of desynchronization in multi-station and long-distance operation of packaged products.

The mechanical transmission adopts the reducer to connect with the main shaft, and the main shaft is on the same axis line to reduce the transmission error.Using the manipulator to clamp the feeding mechanism, the operation is stable, the synchronization is accurate, and the stroke can be adjusted arbitrarily from 150-230mm.

Technical Parameters

Customs code: 8441309000

Paper cover specifications:

height (8-15) mm, DPJ-100/S100 diameter (60 -100) mm, speed: (70-100) pieces per minute.

Height (8-15) mm, DPJ-145/S145 straight strength (100-140) speed: (60-75) per minute.

Height (8-15) mm, DPJ-200/S200 diameter (140 -200) mm, speed: (45-60) pieces/min

Applicable paper: single and double PE/PLA coated paper, coated paper, glazing coated paper (250-480g/m2)

Power: 10kw

Power supply: AC380V 3-phase, 50Hz (can be customized according to customers)

Working air source: air consumption 0.02 cubic meters per minute, working air pressure 0.3MPa

The total weight of the equipment: Cup lid machine .2100KG.

Bowl cover machine.2500KG.

Giant bowl machine 3300KG.

Cup lid machine packaging size 1920*1640*2000

Bowl cover machine packaging size 2200*1880*2100

Giant bowl lid machine packaging size 2600*1850*2200