WuHan Anji Taineng Environmental Sci-Tech Co.,Ltd
                                                                                                           
Verified Supplier
9 Years
Since 2017
Menu

High Performance Polycarboxylic Acid Water Reducer CAS 62601-60-9

Price Negotiable
Price: 650USD-1050USD
MOQ: 1T
Delivery Time: 7-10 DAYS AFTER PAYMENT
Brand: ATET
Product Description

Polycarboxylic acid high performance water reducer CAS 62601-60-9

 

Polycarboxylic acid superplasticizer is the third generation of new superplasticizer for concrete. Compared with naphthalene superplasticizer, polycarboxylic acid superplasticizer has the advantages of high water reduction rate, high strength, low shrinkage, low secretion and low slump loss. Polycarboxylate superplasticizer has relatively good adaptability with different cement. Compared with naphthalene superplasticizer, the strength of polycarboxylate superplasticizer concrete increases faster in early and late periods, especially the strength of high-strength concrete increases more obviously in late periods.

 

Product characteristics:

(1)  Good water reduction rate: the product has good water reduction performance under low content, especially in high grade concrete (above C50), the highest water reduction rate can reach 40%;

(2)  Excellent plastic retention ability: Because the steric hindrance of the side chain of the extended polymer effectively prevents the secondary agglomeration between the cement particles, the product has high dispersion performance and can maintain the performance for a long time, realizing the excellent plastic retention ability of the concrete mix.

(3)  Good early strength and strengthening effect: under the same conditions, the concrete mixed with this product, early strength and strengthening effect is higher than other types of high efficiency water reducing agent.

(4)  Greatly improve the durability of concrete: the product has low alkali content. At the same time, because the water-reducing agent is air-induced water-reducing agent, it can significantly reduce the alkali-aggregate reaction of concrete and improve the freeze-thawing resistance of concrete.

(5)  Dimensional stability: the concrete mixed with this product effectively improves its shrinkage and creep performance, has good dimensional stability, and reduces the risk of cracks.

 

Application scope:

It is suitable for cast-in-place concrete, reinforced concrete, ready-mixed concrete or pumped concrete in industrial and civil buildings, roads, Bridges, port terminals, power stations, airports and other projects. It can prepare special concrete such as high strength, high performance, large volume vibration free and self-compacting.

 

Product name Mother liquor of Polycarboxylate Superplasticizer
Product number KH-401 Delivery date May 5, 2023
Test items Control standard Test results
Water reduction rate(%) ≥25 36
Bleeding rate(%) ≤60 0
Air content(%) ≤6.0 1.5
Difference in setting time(Min) Initial setting Final set Initial setting Final set
-90—+120 -90—+120 +15 +10

 

Compressive strength ratio(%)

3d ≥160 165
7d ≥150 160
28d ≥140 145
28d Shrinkage ratio (%) ≤110 85
Rebar corrosion

Whether there is

rust damage

NO
Pure pulp fluidity (mm) ≥220 280
proportion (g/cm3) 1.03—1.20 1.08
pH值 6—8 6.9
Solid content 50% 49.8

 

 Use recommendations :

When used alone or combined with other varieties of polycarboxylic acid water-reducing agent (mother liquor), the mixture amount of folding-solid should be 0.05%~0.25% of the cementing material, and then added into the mixer with water after proportional dilution. If necessary, appropriate amount of entraining, defoamer, retarding and other components can be added to adjust the relevant properties.

 

Packaging and storage :

Packing: 200kg/BBL, 1ton/BBL or according to customer's request.

 

Storage:

This product should be stored in a special warehouse or fixed place, under the condition of 0~35℃, original seal and avoid direct sunlight, shelf life is 6 months.

 

Safety information :

Health: This product is neutral, non-toxic, after contact with a lot of water can be washed.

 

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company WuHan Anji Taineng Environmental Sci-Tech Co.,Ltd
Location Room 3904, Building 10,Dingxiu International City,No.197, Tangjiadun Road,JiangHan District,WuHan City,HuBei Province,China.
Contact Person HU

Request A Quote

Please check your email address.
Your message must be at least 20 characters.