Laboratory Reverse Osmosis Ultra pure Water Purification Equipment

 

CJ-SL-120-200 (l/h) laboratory reverse osmosis ultrapure water equipment has an exquisite appearance and built-in intelligent system. It is widely used in laboratories, laboratory departments, biochemical analysis and other fields to ensure high water quality standards and provide reliable Ultrapure water source.

 

1. Exquisite appearance design: The whole machine adopts an integrated chassis, which occupies a small space and facilitates the overall layout and installation of the department to ensure efficient use of space.
2. Convenient replacement of disposable consumables: The pretreatment device uses disposable consumables, which are portable for replacement and simplify the operation process.
3. Silent medical wheel: Equipped with a silent medical wheel to reduce noise during operation and create a quiet working environment.
4. Built-in high-density polyethylene sterile water tank: The intelligent design of the water tank, the anti-overflow port and the anti-exhaust gas backflow device ensure the normal operation of the department.
5. Imported reverse osmosis membrane: Equipped with imported reverse osmosis membrane, it can effectively remove impurities in the water and ensure the purity of the water.
6. Intelligent main control system: Equipped with an intelligent main control system, the exterior adopts a quick-plug design, and the waterway and circuit are partitioned to facilitate inspection and maintenance and ensure safe operation.
7. Visible operating status: It has an intuitive operating status display and can monitor the equipment operation at any time.
8. Online monitoring conductivity meter: Equipped with a conductivity meter to monitor water quality in real time and maintain high water quality standards.
9. Equipped with both constant voltage and non-voltage output: The equipment can adjust the constant voltage range to adapt to different experiments and equipment needs.
10. Water guarantee for biochemical instruments: Specially designed for biochemical instruments to ensure priority for water use in biochemical instruments.
11. Low water tank level reminder: Intelligent reminder system to ensure that the water level in the water tank is normal.
12. Intelligent flushing of reverse osmosis membrane: The reverse osmosis membrane has an automatic flushing function to extend its service life.
13. Panel button water dispensing: easy to operate, providing a convenient water experience.
14. Anti-siphon backflow and airflow device: The water tank of the main unit is high above the ground to prevent siphon backflow, and the water tank is equipped with an anti-large airflow device to ensure safe and stable operation of the system.

Parameters

1. Water production volume	120L (water temperature 25°C)
2. Product water quality	CAP water standards
3. Available biochemical water pressure	0.05~0.35Mpa (adjustable).
4. Water inlet requirements	municipal tap water, conductivity ≤ 400μs/cm, pressure 0.15-0.35Mpa (conductivity > 400μs/cm requires a water softener, and a pressure reducing valve can be installed if the water pressure is too high)
5. Power supply requirements	AC 220V/50Hz
6. Environmental conditions	temperature 5~40℃, inlet 5~35℃ water temperature
7. Reverse osmosis desalination rate	≥97.5%

 

Usage
Laboratory water	Inspection Department
Hemodialysis water	Hemodromal
Direct drinking water	Public area
Clean water	Disinfection supply center, endoscopic center, dental department, etc.
Flush water	DSA surgery brushing hands, operating room surgery brushing, etc.

Model	Purify Capacity	Water Quality	Pressure Mpa	Machine Size mm	Timed Loop	UV Disinfection
CJ-SL-120 I	120L/H	≤0.1us/cm	0-0.35	513X740X1536	No	No
CJ-SL-120 II	120L/H	≤0.1us/cm	0-0.35	513X740X1536	Yes	No
CJ-SL-120 III	120L/H	≤0.1us/cm	0-0.35	513X740X1536	Yes	Yes
CJ-SL-160 I	160L/H	≤0.1us/cm	0-0.35	513X740X1536	No	No
CJ-SL-160 II	160L/H	≤0.1us/cm	0-0.35	513X740X1536	Yes	No
CJ-SL-160 III	160L/H	≤0.1us/cm	0-0.35	513X740X1536	Yes	Yes
CJ-SL-200 I	200L/H	≤0.1us/cm	0-0.35	513X740X1536	No	No
CJ-SL-200 II	200L/H	≤0.1us/cm	0-0.35	513X740X1536	Yes	No
CJ-SL-200 III	200L/H	≤0.1us/cm	0-0.35	513X740X1536	Yes	Yes

 

PP Filter + Activated Carbon FIlter+PP Filter + Reverse Osmosis Membrane + Mixed Bed Resin

 

Sichuan Pure Science And Technology Co., Ltd. takes medical water treatment application technology as its core and "take" as the company's business philosophy. It is a professional medical water treatment company integrating scientific research, design, production, sales, installation, service and solution to medical water system integration.
The company's products are mainly used in hospital laboratory departments, laboratories, hemodialysis rooms, sterilization supply rooms, dentistry, central water supply and other fields. The company focuses on product quality and takes after-sales service and advanced technology as its two basic points to provide high-quality and satisfactory solutions to clinical symptoms.