92% Efficiency Φ293mm 90 Degree Optical-Grade PC Led Lens for Warehouses Factories Lighting

Φ293mm 90 Degree Optical-Grade PC 92% Light Transmittance For Warehouses & Factories Lighting

• Diameter: Φ293mm (±0.5mm tolerance)
• Beam Angle: 90° (±3°) uniform distribution
• Material: Optical-grade polycarbonate (PC)
• Light Transmittance: ≥92% 
• UV Protection: Anti-yellowing coating (50,000hrs lifespan)
• Thermal Stability: -40°C to +120°C operating range
• Protection: IP65-rated silicone gasket (dustproof & waterproof)
• Precision-molded freeform optics for uniform illuminance

Quick detail

Description

              
              Φ293mm 90 Degree Optical-Grade PC 92% Light Transmittance For Warehouses & Factories Lighting

• Material: PC (Polycarbonate), known for its durability, heat resistance, and impact resistance.
• Beam Angle: 90 degrees, indicating a wide beam spread suitable for illuminating large areas.
• UGR <25 for anti-glare in high-ceiling environments,Freeform optics for uniform illuminance ,Compatible with 100-240V AC LED modules
• Mounting: Clip-on or screw fixation for high-bay fixtures,Housing: Die-cast aluminum alloy (corrosion-resistant);
• Applications:Warehouses  ,Factories & Manufacturing Plants ,Gymnasiums & Retail Stores

Specifications:

Shipping and Delivery

IES

Drawing

Notices

• Storage: Do not store in dusty place, or expose under corrosive environment.
• Contact: Do not touch the lens surface with bare-hand. Please use gloves to
  touch the lenses.
• Cleaning: Clean lenses only if necessary. Use only mild soap, water and
  soft cloth.Do not use any commercial cleaning solvents.

FAQ

1) Can I have a sample order?
 

A: Yes, we welcome sample order to test and check quality.
 

Mixed samples are acceptable.

2) When can I get the quotation?

A: We usually give you an offer within 12 hours after we get your inquiry. But if you want to get the offer ASAP,please call us or email us that we can reply to you in time.

3) What is the lead time?
 

A:Sample needs about 3-5 days prepared; mass production time needs 7-10 days normally.

4) What are your main products?

A: Our main products are outdoor lenses and indoor lenses .such as:Street &AREA Light lens ,Single lenses,High Bay Light ,ect.