ODM RC Helicopter SMPS Based Battery Charger 24V 600W 1A-25A
24V 600W adjustable voltage current Switching Power Supply Compact 68mm Low noise SMPS 25A 24V
The SMPS is a PFC-programmed power supply that is capable of delivering an output of 25A at 5V-26V, and 600W at AC90V~265V, all within a compact size. The SMPS utilizes innovative technologies to achieve up to 91% efficiency, while maintaining a temperature below 90℃. Its design is compact at only 55mm and operates with low noise, thanks to a cooling fan that is controlled by temperature.
Features
- Intelligent control output voltage and current by microprocessor, 100% calibration before delivery
- ±1% voltage and current accuracy
- Active PFC: smaller AC input current less interference, and Conform to European Commission Regulation no 278/2009 and Energy Star Version 2.0
- AC 90-265V worldwide operation
- Up to 90% of convert efficiency.
- Programmable output voltage from 5V to 26V
- Programmable output current from 1A to 25A
- TFT color LCD display output Voltage, current, power and internal temperature on time.
- 1 Intelligent cooling fans turned on upon the temperature automatically
- 2 pairs 4.0mm gold connector up to 25A each output
Specification
| Input Parameter | Value |
| Rated Voltage | AC110 / 220V |
| Voltage Allowed | AC90 ~ 265V |
| Rated Frequency | 50/60Hz |
| Frequency Allowed | 47~63Hz |
| Max RMS Current | 8A @90V, 3.3A @220V |
| Efficiency | 91% at 60% load and 220Vac input |
| Active PFC | PF>0.99 at 90VAC and 100% of load; PF>0.97 at 220VAC and 100% of load |
| Output Parameter | Value |
| Dual Voltage Range | 5 ~ 26V programmed, and USB port output 5.0V 500mA |
| Voltage Accuracy | ±1% |
| Current Accuracy | ±1% |
| Ripple Voltage | 200mV |
| Current Range | 25A max. |
| Power | 600W max. |
Application
- Home application
- 12-24V DC charger, balance charger for RC model
- RC helicopter, RC aircraft battery charger.
Chargery Profile
From 2006, we focus on developing high power (up to 60A 3000W) charger, balance charger (AC input, DC input and AC/DC dual input) and 800A BMS for up to 24S LiPo/LiFe/ LiTO battery.
Chargery charger can charge any chemical battery including LiPo, LiFe, Li-ion, LiTo, NiMh, NiCD and Pb (Lead acid, VRLA battery), cell count, charge current, end voltage and end current can be programmed. and realize anti-spark and reverse polarity protection when high voltage battery connect to charger or inverter(loader).
Chargery BMS can handle up to 800A charge and discharge current, special designed DCC (DC contactor) is built-in surge suppressing circuit.
Operation
- Connect the SMPS to 110/220V AC socket
- Turn on power switcher
- Adjust output voltage by pressing UP or DOWN button.
- Press SET button for 3 seconds, choose Max. current setting, press UP and DOWN button set maximum output current.
- Press START button for 3 seconds, the SMPS will start, the LCD will display voltage and current.
- Connect suitable device to the SMPS, the device input voltage must be range from 5V to 24V.
- Adjust voltage during working easily by press UP or DOWN button again.
| Program setting | Power ON after press START button |
 |
 |
Error Message
| Error information | DESCRIPTION | DISPLAY |
| Over voltage | Output voltage over 2V of setup value for 2 seconds, S600PLUS turn off automatically and turn on manually | On power off page, OVER voltage is displayed |
| Over current | Output current over 2A of setup for 2 seconds, S600PLUS turn off automatically and turn on manually | On power off page, OVER CURRENT is displayed. |
| Over temperature | The heat sink temperature over 100℃ for 2 seconds, S600PLUS turn off automatically, and turn on automatically | On power off page, OVER TEMPERATURE is displayed. |
| Short circuit | Output voltage is under 4V for 2 seconds and 3 times repeatedly, S600plus turn off automatically, and turn on manually | On power off page, SHORT CIRCUIT is displayed |
Active PFC
Package
- S600 base unit: 1pcs
- Power cable: 1pcs
- Manual:1pcs
Related SMPS list
| Model | Output Voltage | Output current | Maximum Power | Display |
| S400 V3.0 | 10V-30V | 13.5A max. | 400W | Digital LED |
| S600PLUS V2.0 | 5-26V | 1-25A adjustable | 600W | color LCD |
| S1200 V3.0 | 12V-24V | 50A max. | 1200W | Digital LED |
| S1500 V3.0 | 10V-30V | 1-60A adjustable | 1500W | color LCD |
FAQ
Q1. Can I have a sample order for SMPS?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing, 5 -10 working days for mass production.
Q3. Do you have any MOQ limit for OEM order?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for SMPS?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly you confirm the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on SMPS product?
A: Yes. Please inform us formally before our production.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 2 years warranty to our products.
Q8. How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Q9. Why the voltage and current reading on LCD is not accurate?
A: voltage and current are calibrated before ship, otherwise the SMPS don't work, so please check the output wire connection, when distance between the SMPS and your device is a problem, please lengthen AC cable NOT lengthen DC cable (output cable). the 1 meter (14AWG) output cable length is suggested, over 1 meter, will affect voltage and current accuracy at 25A.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.