China 200 Ton Calmp Force Rubber Gasket Vacuum Compression Molding Machine 11KW for sale

200 Ton Calmp Force Rubber Gasket Vacuum Compression Molding Machine 11KW

Price Negotiable

Price: USD 21800-40000one set

MOQ: 1set

Delivery Time: 50days

Brand: Juchuan

Product Description

Detailed Product Description

Clamp Force:	500 Ton	Upper Plate Size:	950*950mm
Lower Plate Size:	1000*1000mm	Distance Of Tie Bar:	1105*475mm
Machine Dimension:	146036003150mm	Motor Capacity:	11KW
Vacuum Pump Power:	4KW	Gross Weight:	14.5Ton
High Light:	rubber compression moulding machine , rubber compression molding machine

200 Ton Calmp Force Rubber Gasket Product Mould 24 Hours Working Vacuum Compression Molding Machine For Parts In India

2RT Machine motion flow:

Setup the mold (initial status)
Supply the material and start the process(close the mold)
Load the mold
The main ram goes up to the predetermined position ready for entering a state of vacuum
Lower the vacuum mask. At the same time, suck out the air until a state of vacuum is reached.
The main ram goes up. Increase the pressure to expel bubbles out.
After the state of vacuum exist mo more, lift the vacuum hood and curing.
After curing, lower the main ram.
Unload the mold, open the mold.
Take out the final product and put new material in.

3RT Features:

The 3RT surpasses the traditional top opening mold that can be used for the triple or four mold plates with the design of opening mold and pushing out the mold in the between.
The opening mold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening and continuous pushing out the mold in between.

3RT Machine motions flow

Unload the mold
M1 goes up to open the mold
M2 goes up and separates from the mold
M2 goes down and close the mold
M1 goes down and close the mold
Load the mold

4RT Features:

The 4RT surpasses traditional top opening mold that can be used for taking out the final product when there are triple or four mold plates with the design of opening mold, pushing out the mold in between, and rising thimble to eject the final production.

4RT Machine motions flow:

Unload the mold
M1 goes up to open the mold
M2 goes up and separates from the mold
M3 follow the K goes backward
M2 goes down
L goes up take out the finished product, clean and place new material for re-start.
L goes down; M2 goes up, M3 follow the bottom plate goes forward.
M2&M1 go down.
Mold in, main ram goes up and molding than main ram goes down and mold-out when completed the process.

Model	Unit	200VF	250VF	300VF	400VF	500VF
Clamping Force	Ton	200	250	300	400	500
Upper Platen Size	mm	510*510	600*600	680*680	800*800	950*950
Lower Platen Size	mm	550*560	650*600	700*800	850*850	1000*1000
Plunger stroke	mm	250	250	300	350	350
Distance of Thermo - plate	mm	250	250	300	350	350
Distance of Tie bar	mm	640*310	745*310	785*380	940*450	1105*475
Die sinking type	2RT-3RT-4RT-Track
Max Operating Pressure	Mpa	20	20	20	20	20
Motor Power	hp	10*2	10*2	10*2	15*2	15
Electric Heating Power	Kw	13.5*2	15.3*2	24*2	26.4*2	36
Vacuum Pump Power	Kw	3	3*2	3*2	3*2	4
Total Power	Kw	45	51.6	69	84.8	49
Gross weight	Ton	7.8	11	15.45	18	14.5
Dimension	mm	293025002350	319029302495	336029702850	365030502900	146036003150