No Postcure Injectable Epoxy Resin , Cas No 25550 51 0 Electrical Insulation Epoxy

Price Negotiable

Price: $4/kg

MOQ: 25KG

Delivery Time: 5 days

Brand: JT-RESIN

Product Description

Wholesale no postcure injecting epoxy resin apply to 10-35KV insulation LBS, BUSHINGS, SPOUTS, MONOBLOCK, SWITCH GEARS,

Insulating Material

Epoxy coating powder JT105 Product

100% thermosetting material Description

Class H epoxy coating powder

It is optimized for use in automated, high-speed electrostatic coating processes

Formulated with superior cut-through resistance and edge coverage, which is ideal

for high performance, densely wound electric motors

For high performance motors

For insulation of wire and busbars

Application

Excellent productivity Features

Shelf stable at room temperature (23℃/73°F)

Easy and affordable to store and use

Suitable for use in hot, humid climates conditions

Uncured Properties:

Hot Plate Gel time, seconds @ 160℃ 26

@210℃ 10

Stick point(℃) 70

Flow @ 150℃ (mm) 21

Particle size distribution ( %) -177 micron/ 80 mesh 100

-44 micron/ 325 mesh 27.5

Cure time ( seconds) @ 220℃ 45

Typical Cured General Properties:

Available colors Green and black

Density 1.6g/cm³

Edge Coverage (%) 41

Cut-through resistance (℃) 396

Volume resistivity (Ω-cm) 5.409 1016

Dielectric Strength V/ mil 1082

KV/ mm 42.6

Glass transition temperature, Tg (℃) 91

Cured 60 minutes @150℃

Coefficient of thermal Expansion, Alpha 1 39

CtE ( ppm/℃) Alpha 2 123

Storage & Handling:

The shelf life is six months at room temperature (23℃/73°F) from production date.
Shelf life may be extended under cold storage condition.
Shelf life can be 18 months or more if stored at 10℃/ 50°F or below.
The product should be stored in closed containers, which should be brought to the ambient.

Temperature of the manufacturing location before opening to prevent water condensation on the

Do not open the packaging while the product temperature is lower than the manufacturing room temperature, otherwise moisture will condense on the surface of product, which will damage the product and result in processing issues, such as incomplete curing.
The time for temperature equilibration depends on the product, for example, 5kg will take about 4 hours to warm-up, however 50kg may require 12-24hours to equilibrate.