Cylindrical Welding Power Supply Lithium Battery Pack Spot Welding Machine
Welding Power Supply Cylindrical Lithium Battery Pack Spot Welding Machine
● The welding current of the power supply rises quickly and achieves high quality welding in a short time.
● There are three welding modes: constant voltage, constant current and constant voltage current
● The output current has various polarity switching functions, which can effectively eliminate the polarity effect in the welding process.
● Microcomputer technology control, real-time monitoring of welding voltage, current, resistance waveform.
● The welding current can be controlled efficiently and quickly by switching between transistors without the need for a transformer
● No need for welding transformer, small, lightweight, beautiful
● Built-in pre-check function, can be used to judge the work piece before welding power
● 5.7 inch HD LED display, device parameter adjustment is convenient and intuitive, multiple programs can be pre-stored
● Energy saving and environmental protection, stable and efficient, low power consumption of equipment.
| Model | MTA-5000A | MTA-8000A | MTA-10000A | MTB-5000A |
| Type | Normal form | Normal form | Normal form | Bipolar switching type |
| Maximum power consumption | 330W | 300W | 550W | 550W |
| Maximum welding current | 3000A | 6000A | 10000A | 5000A |
| Maximum voltage | 30V(customizable) | |||
| Control mode | 1. Constant current control 2. Constant voltage control 3. Current and voltage combination mode | |||
| Time setting | Preloading time:0000-9999MS | |||
| Rise time:0.00-9.99MS | ||||
| Welding 1 Welding 2 Set time:0.00-9.99MS | ||||
| Cooling time:0.00-9.99MS | ||||
| Slow down time:0.00-9.99MS | ||||
| Holding time:0000-9999MS | ||||
| Current setting range | 100-999A | 100-999A | 100-999A | 100-999A |
| 0.25-3.0KA | 0.50-6.0KA | 1.00-9.99KA | 0.50-5.00KA | |
| Voltage setting range | 0.00-9.99V | |||
| Current upper and lower limits set | 000-999A 0.00-9.99KA | |||
| Voltage upper and lower limits set | 0.00-9.99V | |||
| Monitoring display | Power on 1.2(current and voltage RMS/voltage RMS), Power 1.2(peak current/peak voltage), Power 1.2(Power RMS/impedance RMS Current voltage Power positive reactance waveform specification label) |
|||
| Input power supply | Single-phase 200-240VAC50/60HZ | |||
Operating interface
The waveform of welding current, voltage, power and resistance is dynamically detected, and the welding energy is displayed in real time.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.