One color  Printer Slotter Rotary Die Cutter In Line Case Maker

                                                     Model: 2200x5200

Technical parameters:

Max. sheet: 2200x5200mm

Min. sheet: 500 x 1800mm

Max. Printing area: 2200x5200mm

Min. Printing area:500x1800mm

Paperboard thickness: 3-9mm

Design speed: 40 sheets / min.

Dimension: 39210 x 8530x2500mm

Total power: 325.2KW

Total weight: 168.26 Tons

Iron wall thickness: 90 mm

Cliche thickness: 3.4mm, 3.7mm, 3.8mm,7mm.

Printing tolerance: +1.5mm

Folding error:+1.5mm

Features

1.The bottom printing printer slotter die cutter in line case maker consists of lead edge feeder,bottom printers, slotter, die cutter in line case maker, counter ejector and delivery section.

2.All the units can move, all the rollers gap adjusted by PLC and touch screen, all the electric parts are Siemens.

3. Gears are made of 20CrMnTi,HRC 55-62, class 6 precision. Main Bearings SKF, the others are of NSK.

4.Pull roll transfer at all printing units.

5. Ceramic anilox rollers with LPI arrangements within 220-600LPI which the Buyer can choose.

6.LED display of speed and finished quantity.

Rotary Die-Cutter Unit Features:

A. Die Cylinder (Lower)

1 Ground and chromed high quality steel

2 Dynamic balanced for stable running.

3 Fixing hole distance is 50mm lateral.

4 Creasing height is 22.60mm.

5 Wooden die thickness is 13mm.

B. Anvil Cylinder (Upper)

1 Ground and chromed high quality steel

2 Dynamic balanced for stable running.

3 Anvil cover thickness is 10mm,width is 252mm.

4 Side to side oscillation of anvil cylinder( 50mm).

5 Motorized gap adjustment between anvil roll and die cylinder.

C. Self-locking System Adopted for Pulling Roll Gap.

D. Cam bearing applied for the Pull Roll working, wear reduced and run more stable.

E. Cutting Registration Adjust System

Folder gluer

Feeding section

1) Feeding mouth in back of die cutting unit of printer

2) Glue Spray system installed---VALCO SPRAY GLUING SYSTEM with four guns.

3) Blower install for waste cleaning

Folding section

1.Auxiliary creasing wheel in front section to ensure easy folding

2.All the transmission belts are of good quality and high wear-resistant,long time service life.

3) Convey beams lateral movement by electric control

4) Transmission belt extension can be adjusted by pheumatic system.

5) Upper and down belt speed can be adjusted to help minimize fishtail on the carton joint.

6) Vacuum suction system to make beam transference more smoothly.

7) Special disc mechanism can solve the fishtail problem effectively on the special position on the two folding beams.