Carton Box Printing Slotting Machine Box Making Machines
High Speed Printer Slotter And Die Cutter
Operation manual
Instructions of operation adjustment;
Button 1 is used to adjust the pressure between anilox roller and cliché cylinder(Photo 2 and Photo 2-1), adjust pressure according to cliché thickness, adjust the hand knob according to paperboard thickness to make scale plate rotate till the needle point to the data which the needle points to. If cliché catches uneven ink, increase the pressure till the ink is even. Remarks: Too much pressure will lead to obscure printing result and damage the cliché.
Button 2 is to adjust the pressure between rubber roller and anilox roller(Photo 3), adjust the knob and make the scale plate rotate to 0 position on the plate and start the supply ink. Before inking, adjust the suitable pressure, clean the anilox after work. And then adjust the hand knob to rotate to the data 2. If not decrease the pressure, the life of the rubber roller will get short.
| Model | 1600x3200 |
| Machine Speed(m/min) | 180 |
| Machine Max.speed (pcs/min) | 150 |
| Machine Max.feeder Size(mm) | 1600x3200 |
| Machine min.feeder Size(mm) | 450x760 |
| Machine Max. printer size (mm) | 1600x3100 |
| thick of printer Plate(mm) | 7.2 |
| Max. slotter Dep (mm) | 560 |
| Max. Thickness of Sheet(mm) | 15 |
|
Machine size (LxWxH)
|
21852x7370x2500 |
Safety instructions
Before operating this machine, please read the following safety guidance for complete understanding:
- Please operate this machine according to the manufacturer’s guidance and your factory relative safety operation regulations.
- A clean and neat working area should be sustained.
- All the safety protection devices should be placed properly in position and all the safety operation switches should be running normally.
- Operators should wear suitable uniforms and use all necessary safety devices (for example, to wear gloves when operating and inspecting the machines)
- Fasten the loose hair and clothes to avoid contact with movable equipment.
- Find out the damaged or worn parts of the machine and arrange the experienced technicians to repair or adjust the machine.
- Remember never touch the moving equipment manually or with tools.
- Lock the power source and be sure the keys are at your hand when making maintenances.
- Remind the non-duty persons to keep away far from the working area when switching off or starting the machine.
.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.