LW-FPP-F11 Series Fiber Distribution Unit
Description:
Fiber Distribution Unit is used as fiber termination enclosures to fix fiber optic cables, splice and store fibers, and patch in the cabling of a fiber-optic network.
Fiber Distribution Unit ensures fiber-optic network reliability by housing, managing, and protecting up to 24 fibers by a very compact design. Fiber Distribution Units are able to serve as a transition from feeder cable to distribution cable, interconnect or cross-connect to the optically active device.
Features:
Small dimension in the width
Adapters are installed in angle to avoid direct laser beam.
Changeable adapter panel for SC, FC, LC, etc.
Specifications:
| Applicable Adapter | SC, FC, LC |
| Capacity | 12/24 fibers for 1 U, 48 fibers for 1.5U or 1U(By Using Duplex Adaptors) |
| Material | cold rolled steel |
| Color | Milky Grey or other appointed Color |
| Size | 488(W)*190(D)*44(H)mm (19” 1U) |
| Installation Method | 19” rack mount |
| Splice Tray Capacity | 12 or 24 fibers/ tray |
| Cable Port Quantity | 4 ports at back, 3 ports each side(Left and Right) |
Ordering Information: LW-FPP-F11-XX-XX-XX:
| Model | LW-FPP-F11 |
| XX: Adapter | None: without adapter
SC: SC/UPC SA: SC/APC FC: FC/UPC FA: FC/APC LC: LC/UPC LA: LC/APC |
| XX: Pigtail | None: without pigtail
9: 0.9mm 2: 2.0mm 3: 3.0mm D: 0.9mm distribution cable R: ribbon |
| XX: Fiber Capacity | 12: 12 fibers
24: 24 fibers |
Note:
1, Customization is available:
Printing logo, frame material, fiber capacity, adapter type, pigtail type, frame color, etc.
2, Pictures are only for suggestion.
Pictures will be shared before order delivery.