Stranded Light Armored Fiber Optic Cable Loose Tube Fiber Cable GYTA
Stranded Loose Tube Light Armored Cable – GYTA
Cable Structure:
The 250um bare fibers are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of the core as a metallic strength member. Tubes and fillers are stranded around the strength member into a compact and circular cable core. An aluminum polyethylene Laminate (APL) is applied over the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable is completed with a PE sheath.
Specifications:
| Fiber Count | Tubes | Fillers | Cable Diameter
(mm) |
Tensile Strength
(N) |
Crush Resistance
(N/100mm) |
Bending Radius
(mm) |
Cable Weight
(kg/km) |
|||
| Short Term | Long Term | Short Term | Long Term | Dynamic | Static | |||||
| 2~6 | 1 | 4 | 9.2 | 1,500 | 600 | 1,000 | 300 | 20D | 10D | 80 |
| 8~12 | 2 | 3 | 9.2 | 1,500 | 600 | 1,000 | 300 | 20D | 10D | 80 |
| 14~18 | 3 | 2 | 9.2 | 1,500 | 600 | 1,000 | 300 | 20D | 10D | 80 |
| 20~24 | 4 | 1 | 9.2 | 1,500 | 600 | 1,000 | 300 | 20D | 10D | 80 |
| 26~30 | 5 | 0 | 9.2 | 1,500 | 600 | 1,000 | 300 | 20D | 10D | 80 |
| 32~36 | 6 | 0 | 9.7 | 3,000 | 1,000 | 1,000 | 300 | 20D | 10D | 97 |
| 38~48 | 4 | 1 | 10.5 | 3,000 | 1,000 | 1,000 | 300 | 20D | 10D | 109 |
| 50~60 | 5 | 0 | 10.5 | 3,000 | 1,000 | 1,000 | 300 | 20D | 10D | 109 |
| 62~72 | 6 | 0 | 11.5 | 3,000 | 1,000 | 1,000 | 300 | 20D | 10D | 126 |
| 74~84 | 7 | 1 | 13.2 | 3,000 | 1,000 | 1,000 | 300 | 20D | 10D | 153 |
| 86~96 | 8 | 0 | 13.2 | 3,000 | 1,000 | 1,000 | 300 | 20D | 10D | 153 |
| 98~108 | 9 | 1 | 14.6 | 3,000 | 1,000 | 1,000 | 300 | 20D | 10D | 182 |
| 110~120 | 10 | 0 | 14.6 | 3,000 | 1,000 | 1,000 | 300 | 20D | 10D | 182 |
| 122~132 | 11 | 1 | 16.5 | 3,000 | 1,000 | 1,000 | 300 | 20D | 10D | 221 |
| 134~144 | 12 | 0 | 16.5 | 3,000 | 1,000 | 1,000 | 300 | 20D | 10D | 221 |
| 146~216 | 18 | 0 | 16.5 | 3,000 | 1,000 | 1,000 | 300 | 20D | 10D | 222 |
Remark:
The nominal value of the PE sheath thickness is1.6mm.
Environmental Properties:
| Temperature Range | -40°C~+70°C |
Transmission Properties:
| Fiber Type | SM 9/125um
(1310nm/1550nm) |
62.5um (OM1)
(850nm/1300nm) |
50um (OM2)
(850nm/1300nm) |
50um (OM3)
(850nm/1300nm) |
| Maximum Attenuation (dB/km) | 0.4/0.22 | 3.5/1.5 | 3.5/1.5 | 3.5/1.5 |
| Typical Attenuation (dB/km) | 0.35/0.2 | 3.5/1.5 | 3.0/1.0 | 3.0/1.0 |
| Minimum LED Bandwidth (MHz·km) | — | 200/500 | 500/500 | 1500/500 |
Note:
Other fiber types are available upon request.
Features:
- Crush resistance and flexibility
- Good mechanical and temperature performance
- PE sheath protects the cable from ultraviolet radiation
- High strength loose tube that is hydrolysis resistant
- Special tube filling compounds ensure a critical protection of fiber
- A specially designed compact structure is good at preventing loose tubes from shrinking
- The following measures are taken to ensure the cable is watertight:
Steel wire used as the central strength member
Loose tube filling compound
100% cable core filling
APL moisture barrier
Standard:
- YD/T901-2001
- IEC 60794-1
Application:
- Duct
- Aerial
Ordering Information:
| Brand | LW |
| Name | GYTA=Stranded Loose Tube Light Armored Cable – GYTA |
| Fiber Count | 2=2 fibers; 4=4 fibers; 6=6 fibers; 8=8 fibers;
10=10 fibers…214=214 fibers; 216=216 fibers |
| Fiber Mode | SM=SM 9/125um; MM=50/125um or 62.5/125um |
| Fiber Type | 2D=SM G.652.D; 5=SM G.655;
7A1=SM G.657.A1; 7A2=SM G.657.A2; 7B2=SM G.657.B2; 7B3=SM G.657.B3; OM1=MM 62.5/125um; OM2=MM 50/125um; OM3=MM 10G 50/125um 150m; OM33=MM 10G 50/125um 300m; OM4=MM 10G 50/125um 550m |
| Fiber Length | 0.5=0.5km; 1=1km; 1.5=1.5km; 2=2km; etc |
About Linkwell
Bringing Better Connections
Linkwell is a Fiber Optic company, focused as a “Reliable Partner” on offering solution and suitable products to Operators and Partners.
With our 9 years vendor experience for China Telecom, We combine installation experience, inspection experience, manufacturing experience, and delivering experience es to deliver first-in-class solutions and products.
LinkWell was initially founded by 33-Year experienced Engineers, 21-years-experienced Factory Owner and 16-Years experienced coustanlt.
At LinkWell, All of our staff are trained to adopt a customer driven approach as our strategic focus with fundamental values and generally accepted moral principles such as respect and honesty being the basis of all our dealings.
These inculcated values in our staff has led to the establishment of LinkWell as a mainstay force in this industry.
Our staff have been extensively trained to harness the company’s strategic strengths and core competencies in order to provide the highest level of satisfaction to our valued clients.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.