4718 - 100 Mm Mesh Mist Eliminator In 316SS Material Custom Order

Mesh pad demister introduction:

It is used in removing droplets entrained in flow gas, is constructed from knitted wire mesh with a cellular structure. The knit mesh are made into a mesh pad with determinate thickness and diameter, through which the two phases liquid-gas or liquid-vapor are disengaged.

From the statistic data obtained both in laboratory tests and industrial applications, it shows that the proper designed mesh pad demister allows a separation of liquids carried by gas with efficiency reaching 99.9%.

Mesh Pad Demister Specification in this case

Mesh pad demister Material:

1. SS304, for water solutions, Nitric acid reduced crude petroleum fraction etc.
2. SS316L, for fatty acid reduced crude containing naphthenic acids and corrosive chemicals.

3. PP(Polypropylene), for corrosive service at temperature up to 70℃.

4. PTFE, for corrosive service at temperature of (-190℃, 250℃).

5. Monel, for caustic soda, dilute acid.

6. Nickel, for caustic Soda, food products.

7. Copper, for Freon, alcohol.

8. Aluminium, for Nitric Acid.

Mesh pad demister Advantages:

Simple installation; Low pressure loss; 90% to 99.9% efficiency; Little maintenance is required; Elimination of liquid product loss; Essential improvement of vapor phase quality; Dimensions and configurations are not limited; Contacting surface area is larger than the specific gravity; No direct power is required since the equipment has no operating parts; Compact equipment can be used in accordance with increased production capacity;