Cy 700 Type Wire Mesh Structured Packing Dn 800 Mm * 12000 Mm Height

Description

1. CY 700 type DN 800 mm * 12000 mm height wire mesh structured packing used in distillation column.

It is an typical distillation packing. The tower internal diameter is 800mm. And the packing beds are totally 12000 mm. So we will need to make 60 layers of CY 700 wire mesh structured packing pieces for this tower.

2. What are the necessary structured pacing conditions for CY 700 type DN 800 mm * 12000 mm height wire mesh structured packing​?

1) The surface area per unit volume of structured packing should be large;
2) The free volume of the liquid phase in contact with the gas phase must be large;
3) The resistance to steam should be small (i.e. the cross-sectional area of the gap should be large);
4) Chemical resistance to both liquids and vapors;
5) The density should be small;
6) The price per unit of effective area should be small

3. Hualai structured packing types

Note: The influence of opening rate on the plate is not calculated

4. CY 700 type DN 800 mm * 12000 mm height wire mesh structured packing​ introduction.

1.1 This standard specifies the requirements for marking, specification and characteristics, materials, manufacturing requirements, inspection and acceptance, marking, packaging, storage and transportation of stainless steel orifice corrugated packing products, as well as the calculation of characteristic parameters of orifice corrugated packing.

1.2 The corrugated packing with stainless steel orifice plate is suitable for gas-liquid mass transfer separation tower equipment, and the applicable temperature of the packing is - 200 ~ 400 ℃.

1.3 The structured packing is suitable for the clean gas-liquid system without solid particles or suspended solids or easy to self assemble.

2. Reference standard: GB / T 4239 cold rolled stainless steel and heat resistant steel strip