500Y Metal Sheet Structural Packing Material In Distillation Column 5000mm Diameter
500Y Metal Sheet Structured 5000mm Diameter Distillation Packing
Yuanqiao made 500Y metal sheet structured packing 5000 mm diameter
1. 5000mm diameter 500Y metal sheet structured packing.
When the thin layer of high porosity packing is placed in the large diameter tower, the gas flow distribution on the cross section of the tower is not uniform, which affects the mass transfer efficiency of the packing. At this time, the inlet gas distributor should be set to make the high-speed gas flow in the feed pipe evenly distributed on the cross-sectional area of the tower.
2. Yuanqiao factory metal corrugated plate structured packing
| Item | Unit | 125X | 125Y | 250X | 250Y | 350X | 350Y | 500X | 500Y | |
| corrugation height h | mm | 24.0 | 11.5 | 8.4 | 6.0 | |||||
| corrugation inclination θ | (°) | 30 | 45 | 30 | 45 | 30 | 45 | 30 | 45 | |
| corrugation distance 2B | mm | 39.6 | 19.0 | 14.0 | 9.9 | |||||
| corrugation angle β | (°) | 79.0 | 79.1 | 79.6 | 79.0 | |||||
| void fraction ε | δ=0.15mm | % | 99.4 | 98.6 | 98.0 | 97.2 | ||||
| δ=0.12mm | % | 99.5 | 98.9 | 98.4 | 97.8 | |||||
| δ=0.10mm | % | 99.6 | 99.1 | 98.7 | 98.2 | |||||
| Perforated hole diameter d0 | mm | 4.5 | 4.5 | 4.0 | 4.0 | |||||
| Opening rate σ | % | 8.5-9.5 | 8.5-9.5 | 9.0-10.0 | 9.0-10.0 | |||||
| radius of curvature of the top circle of corrugation angle R | mm | ≤2.0 | ≤1.4 | ≤0.9 | ≤0.5 | |||||
Note: The influence of opening rate on the plate is not calculated
3. Function of metal corrugated plate structured packing in distillation column
Through the packing, the two-phase flow is upward and downward convection. Gravity is the driving force of liquid flow, and pressure difference is the driving force of gas flow. The two phase flow is mass transfer and heat transfer through the two forms of film surface and spray. The mass transfer and heat transfer of the two phases in the plate column take place in the gas-liquid mixed phase on the upper surface of the tray, on the liquid layer surface of the downcomer and on the bubbling area caused by the mass transfer elements.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.