Electric High Pressure Ball Valve Two Way Butt Welding Ball Valve 1 2" 3/4"

FABIA Electric High Pressure Two Way Butt Welding Ball Valve

1. Description:

Electric two-way ball valve is usually connected by the electric actuator and the valve, and becomes an electric valve after installation and debugging.

Electric two-way valve uses electric energy as the power to connect the electric actuator to drive the valve and realize the switching and adjusting action of the valve.

So as to achieve the purpose of switching or adjusting the pipeline medium.

2. Specification:

3. Features:

• Used to control the opening or closing of cold water or hot water air conditioning system pipes, to achieve the purpose of controlling room temperature.
• Driver is driven by a single hysteresis synchronous motor, the valve spring is reset, the valve is not working when it is normally closed, when it needs to work, the thermostat provides an open signal, so that the electric valve is connected to the AC power supply and action.
• Open the valve, chilled water or hot water into the fan coil, to provide cold or heating for the room, when the temperature reaches the thermostat set value,
• Thermostat makes the electric valve power off, the reset spring to close the valve, thus cutting off the flow into the fan coil,
• through the valve closed and opened, so that the room temperature is always maintained in the temperature control set temperature range.