Electric High Pressure Three Piece Flange Ball Valve

1. Description:

High pressure flange ball valve is a relatively new type of ball valve category,

Own structure has some unique advantages, such as no friction switch,

Seal is not easy to wear, small opening and closing torque.

Reduces the size of the configured actuator.

Coupled with a multi-turn electric actuator, the medium can be adjusted and tightly cut off.

Widely used in petroleum, chemical industry, urban water supply and drainage and other conditions requiring strict cut-off

2. Specification:

3. Features:

• Fluid resistance is small, and its resistance coefficient is equal to that of the pipe segment of the same length.
• Simple structure, small size, light weight.
• Tight and reliable, the sealing surface material of the ball valve is widely used in plastic, good sealing, and has been widely used in the vacuum system.
• Easy to operate, open and close quickly, from full open to full close as long as the rotation of 90 degrees, easy to remote control.
• Easy maintenance, ball valve structure is simple, the sealing ring is generally active, disassembly and replacement are more convenient.
• When fully open or fully closed, the sealing surface of the ball and the seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when it passes through.
• Wide range of application, small diameter to a few millimeters, large to a few meters, from high vacuum to high pressure can be applied.
• When the ball is rotated 90 degrees, the inlet and outlet should all be spherical, thus cutting off the flow.
•