Product Description:

A pneumatic cylinder is a mechanical device that uses compressed air to create linear or rotary motion. It consists of a cylinder with a piston inside, which moves in response to changes in air pressure. The supercharging of a pneumatic cylinder involves increasing the amount of compressed air that is used to power the cylinder, thereby increasing its force and speed.

Features:

This product is suitable for direct drive spindles and motor built-in spindles, specially designed for high-speed cutting. It is also a power source which must be used together with a hollow hydraulic cylinder.

Technical Parameters:

This product uses 0.4Mpa - 0.6Mpa (4kgf/ cm²- 6kgf/ cm²) of filter compressed air.

The type of transmission oil used is 46 #viscosity grade ISO VG32 or a same level.

The working temperature for this product ranges from 0ºC - 60ºC.

The split out quantites are 150cc, 110cc, 70cc and 50cc.

This product is available for use with DC24, AC110, and AC220 voltage.

Applications:

The Knife Cylinder is a high-speed cutting tool designed for pressure direction applications. It is equipped with a DC24, AC110, or AC220 voltage, and it is capable of working with 46 #viscosity Grade ISO VG32 or a comparable level of transmission oil. It is mounted vertically and has a working pressure of 0.4Mpa to 0.6Mpa (4kgf/Cm² to 6kgf/Cm²) for filtering compressed air. The Knife Cylinder has four split out quantities of 150cc, 110cc, 70cc, and 50cc. It is an ideal choice for high-speed cutting and powering piston cylinders.

Customization:

Support and Services:

We provide technical support and service for Knife Cylinder products. Our support team consists of experienced professionals who are always ready to help you with any technical issues you may have.

We offer a range of services, including:

• 24/7 telephone and email support
• On-site repair and maintenance
• Troubleshooting and diagnostics
• Software updates and upgrades
• Parts replacement and repairs

Our service team is available to answer any questions you may have and provide advice on how to best use your Knife Cylinder product. We are dedicated to ensuring your satisfaction with the product and providing you with the best technical support available.

Packing and Shipping:

The Knife Cylinder is packaged and shipped in the following manner:

• The product is placed in a cardboard box.
• The box is sealed with tape.
• The box is labeled with the product name and logo.
• The box is then packaged in bubble wrap or other protective material.
• The package is then placed in a shipping box.
• The shipping box is labeled with the product name, the recipient’s address, and other relevant information.
• The box is then shipped via the chosen delivery service.