Polymer Insulator Epoxy Fiberglass Rod Fuse Cut Out Surge Arrester Fiberglass Pole
Customized Epoxy Fiberglass Rod For Polymer Insulator Fuse Cut Out Surge Arrester Fiberglass Pole
Product:
1. Features and Application of customized epoxy fiberglass rod for polymer insulator fuse cut out surge arrester fiberglass pole:
Fiberglass rod is a rod-shaped product made of glass fiber reinforced material, which has the following characteristics:
1 High strength: Glass fiber rods have high tensile and bending strength, and compared to traditional metal rods, glass fiber rods can provide higher strength under the same weight.
2. Lightweight: Compared to metal bars, fiberglass bars have a lower density, making them lightweight and suitable for applications with high weight requirements.
3. Corrosion resistance: Glass fiber rods have good corrosion resistance to most chemicals and can be used in harsh environments, making them less susceptible to corrosion and oxidation.
4. Insulation performance: Glass fiber rod is an excellent insulation material that can effectively isolate current and heat, and has good electrical insulation and thermal insulation performance.
5. High temperature resistance: Glass fiber rods can maintain structural stability and physical properties in high-temperature environments, with high temperature resistance typically reaching hundreds of degrees Celsius.
6. Long service life: Glass fiber rods have good durability and fatigue resistance, are not easy to break or deform, and have a long service life.
7. Easy to process: Glass fiber rods can be processed and shaped through cutting, drilling, grinding, and other methods, adapting to various complex design requirements.
2.Technical Parameters:
| No. | Technical specification | Unit | value |
| 1 | Density(20℃±2℃) | g/cm3 | ≥2.2 |
| 2 | Water absorption rate (20℃±2℃,24h) | % | ≤0.05 |
| 3 | Tensile strength | Mpa | ≥1200 |
| 4 | Bending strength | Mpa | ≥960 |
| 5 | Dye penetrated test | Min | ≥15 |
| 6 | Water diffusion test (1%NaCl, 100h 12kv/1min) | mA | ≤0.1 |
| 7 | Shearing strength along laminas | Mpa | ≥50 |
| 8 | Volume resistivity (140℃,96h) | Ω.M | ≥1010 |
| 9 | DC withstand voltage (10mm) | Kv | ≥50 |
| 10 | Lighting impulsed withstand voltage (100kv,10mm) | Times | ≥5 |
| 11 | Bending strength at heating conditions | Mpa/150℃ | ≥350 |
| 12 | Torsion strength | Mpa | ≥800 |
| 13 | Stress corrosion (1mol/1HNO3,at 67%stress) | h | 96 |
3. More detail information for customized epoxy resin fiberglass rod for composite insulator fuse cut out surge arrester
1 - Continuous roll of reinforced fibers/woven fiber mat
2 - Tension roller
3 - Resin Impregnator
4 - Resin soaked fiber
5 - Die and heat source
6 - Pull mechanism
7 - Finished hardened fiber reinforced polymer
Products Size
| 产品编号Products Code | D(mm) | L (mm) | 参考重量Weight (kg) | 产品编号Products Code | D(mm) | L (mm) | 参考重量Weight (kg) |
| TECR00400 | Φ4 | 1000 | 0.028 | TECR03600 | φ36 | 1000 | 2.20 |
| TECR00450 | Φ4.5 | 1000 | 0.035 | TECR03800 | φ38 | 1000 | 2.46 |
| TECR00500 | Φ5 | 1000 | 0.05 | TECR04000 | φ40 | 1000 | 2.70 |
| TECR00550 | Φ5.5 | 1000 | 0.052 | TECR04100 | φ41 | 1000 | 2.84 |
| TECR00800 | Φ8 | 1000 | 0.11 | TECR04200 | Φ42 | 1000 | 2.99 |
| TECR01000 | Φ10 | 1000 | 0.17 | TECR04500 | φ45 | 1000 | 3.42 |
| TECR01200 | Φ12 | 1000 | 0.25 | TECR05000 | φ50 | 1000 | 4.28 |
| TECR01600 | φ16 | 1000 | 0.44 | TECR05300 | φ53 | 1000 | 4.75 |
| TECR01670 | Φ16.7 | 1000 | 0.49 | TECR05500 | φ55 | 1000 | 5.12 |
| TECR01748 | Φ17.48 | 1000 | 0.53 | TECR06000 | φ60 | 1000 | 6.10 |
| TECR01800 | φ18 | 1000 | 0.55 | TECR06350 | Φ63.5 | 1000 | 6.97 |
| TECR02000 | φ20 | 1000 | 0.69 | TECR06800 | φ68 | 1000 | 7.96 |
| TECR02200 | φ22 | 1000 | 0.83 | TECR07000 | φ70 | 1000 | 8.44 |
| TECR02400 | φ24 | 1000 | 0.99 | TECR07620 | Φ76.2 | 1000 | 10.15 |
| TECR02500 | φ25 | 1000 | 1.07 | TECR08000 | φ80 | 1000 | 10.90 |
| TECR02600 | φ26 | 1000 | 1.14 | TECR09000 | φ90 | 1000 | 14.24 |
| TECR02800 | φ28 | 1000 | 1.47 | TECR11000 | φ110 | 1000 | 21.36 |
| TECR03000 | φ30 | 1000 | 1.53 | TECR12000 | Φ120 | 1000 | 24.87 |
| TECR03200 | φ32 | 1000 | 1.76 | TECR13000 | Φ130 | 1000 | 29.65 |
| TECR03400 | φ34 | 1000 | 1.97 |
4. Packing and Shipping:
Insulator Fittings/ Fiberglass Rod/ Rubber Packaging and Shipping:
Insulator Fittings: Packaged in cardboard boxes, wrapped in plastic wrap and secured with tape.
Fiberglass Rod: Wrapped in plastic bubble wrap and placed in cardboard boxes.
Rubber: Placed in cardboard boxes lined with plastic wrap.
All items will be shipped via UPS or other courier services.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.