Composite Insulator Epoxy Resin Fiberglass Rod Epoxy Resin Fiberglass Pole Surge Arrester
High quanlity Epoxy Resin Fiberglass pole For Composite Insulator Fuse Cut Out Surge Arrester
Product:
1.Product Description of high quanlity epoxy resin fiberglass pole for composite insulator fuse cut out surge arrester
Fiberglass rod is a long strip of material made of glass fiber. It is usually composed of slender bundles of glass fibers or ropes, which are bundled together to form a sturdy rod-shaped structure. Glass fiber rods have many advantages, including high strength, lightweight, and corrosion resistance
The products made of glass fiber rods have good corrosion resistance and electromagnetic shielding performance, which can provide reliable cable protection.
2. Technical Parameters of high quanlity epoxy resin fiberglass pole for composite insulator fuse cut out surge arrester:
| No. | Technical specification | Unit | value |
| 1 | Density(20℃±2℃) | g/cm3 | ≥2.2 |
| 2 | Water absorption rate (20℃±2℃,24h) | % | ≤0.05 |
| 3 | Tensile strength | Mpa | ≥1200 |
| 4 | Bending strength | Mpa | ≥960 |
| 5 | Dye penetrated test | Min | ≥15 |
| 6 | Water diffusion test (1%NaCl, 100h 12kv/1min) | mA | ≤0.1 |
| 7 | Shearing strength along laminas | Mpa | ≥50 |
| 8 | Volume resistivity (140℃,96h) | Ω.M | ≥1010 |
| 9 | DC withstand voltage (10mm) | Kv | ≥50 |
| 10 | Lighting impulsed withstand voltage (100kv,10mm) | Times | ≥5 |
| 11 | Bending strength at heating conditions | Mpa/150℃ | ≥350 |
| 12 | Torsion strength | Mpa | ≥800 |
| 13 | Stress corrosion (1mol/1HNO3,at 67%stress) | h | 96 |
3. More detail information for high quanlity epoxy resin fiberglass pole for composite insulator fuse cut out surge arrester,
Support and Services:
We provide technical support and services for Insulator Fittings/ Fiberglass Rod/ Rubber. Our technical support team can answer any questions you may have about these products. They can provide advice on installation, troubleshooting, and maintenance. We also offer a warranty on all our products. If any of our products fail due to manufacturing defects, we will replace them free of charge. Finally, we are always available to answer any additional questions you may have.
Packing and Shipping:
Insulator Fittings/ Fiberglass Rod/ Rubber Packaging and Shipping:
- Insulator Fittings: Packaged in cardboard boxes, wrapped in plastic wrap and secured with tape.
- Fiberglass Rod: Wrapped in plastic bubble wrap and placed in cardboard boxes.
- Rubber: Placed in cardboard boxes lined with plastic wrap.
All items will be shipped via UPS or other courier services.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.