• Junos OS Release 15.1F4 with Junos Continuity.

• Junos OS Release 15.1F6 and later.

• Junos OS release 16.1R1 and later.

• Fixed-configuration MPC with 10-Gbps, 40-Gbps, and 100-Gbps port speeds

• Weight: 15.7 lb (7.12 kg)

• Model number: MPC7E-MRATE

• Name in the CLI: MPC7E-MRATE

• Line-rate throughput of up to 480 Gbps on MX240, MX480, and MX960 routers.

• Line-rate throughput of up to 400 Gbps on MX2000 routers with SFB, and up to 430 Gbps on MX2000 routers with SFB2.

• Junos Trio chipsets for increased scaling for bandwidth, subscribers, and services

• Twelve Gigabit Ethernet ports that can be configured as 40-Gigabit Ethernet port or as four 10-Gigabit Ethernet ports using a breakout cable. The ports support quad small-form factor pluggable plus (QSFP+) transceivers. The 40Gbps or 100Gbps ports configured to run at 10Gbps speed are shown in the CLI as follows:

  show interfaces terse
  Interface               Admin Link Proto    Local                 Remote
  xe-10/0/0:0             up    down
  xe-10/0/0:1             up    down
  xe-10/0/0:2             up    down
  xe-10/0/0:3             up    down
  

• Four out of the twelve ports can be configured as 100-Gigabit Ethernet ports. Port numbers 0/2, 0/5, 1/2 and 1/5 are the four 100-Gigabit Ethernet ports.

• You can configure different combination of port speeds as long as the aggregate capacity per group of six ports labeled 0/0 through 0/5 does not exceed 240 Gbps. Similarly, aggregate capacity per group of the other six ports labeled 1/0 through 1/5 should not exceed 240 Gbps.

• Requires high-capacity power supplies, high-capacity fan trays, and SCBE2 or SCBE3 switch control boards on MX240, MX480, and MX960 routers.

• Requires an adapter card to be housed in MX2000 routers.

• The ports are labeled as (with the MPC orientation as shown in the above figure):

  < >

  10-Gigabit Ethernet or 40-Gigabit Ethernet ports:

  0/0, 0/1, 0/2 100G, 0/3, 0/4, 0/5 100G, 1/0, 1/1, 1/2 100G, 1/3, 1/4, and 1/5 100G

  100-Gigabit Ethernet ports:

  0/2 100G, 0/5 100G, 1/2 100G and 1/5 100G

  Supports maximum transmission units (MTUs) from 256 bytes through 16,000 bytes for transit traffic, and from 256 bytes through 9,500 bytes for host bound packets.

• Supports rate selectability at the port level.

• By default, the ports are configured as 10-Gigabit Ethernet ports.

• Optical diagnostics and related alarms

• See Protocols and Applications Supported by the MPC7E for MX Series Routers for information about the protocols and applications that the MPC7E supports.

.

• At different temperatures:

  55° C: 545 W

  40° C: 465 W

  25° C: 440 W

OK/FAIL LED, one bicolor:

• Steady green—MPC is functioning normally.

• Yellow—MPC has failed.

LINK LED, one green per port (4 per QSFP+ cage):

• Steady green—Link is up.

• Off—Link is down or disabled.