Low Noise Pneumatic Industrial Diaphragm Pump Easy Maintenance High Reliability

Pneumatic Industrial Diaphragm Pump Introduction

Pneumatic diaphragm pump is a new type of conveying machinery that uses compressed air as the power source, and can pump all kinds of corrosive liquids. Its performance parameters are similar to those of imported pumps. It is placed in various special occasions and used to pump various media that cannot be pumped by conventional pumps. It has achieved satisfactory results. It can also be divided into cast iron, stainless steel, aluminum alloy, etc. according to user requirements. Fluoroplastics, etc.

Pneumatic Industrial Diaphragm Pump Precautions For Use

1. It is strictly forbidden to install valves at the pump outlet, if it is necessary to install valves; a safety valve should be installed at the outlet, and the working pressure should not exceed 4 kg to avoid losses.
2. Refuel in time to keep the lubrication system running normally.
3. The ambient temperature of the pump during use should be less than 40°C, and the temperature of the motor should not exceed 75°C.
4. The conveyed medium and its temperature should be within the allowable range of the pump material.
5. When the conveying liquid is a medium that is prone to precipitation and crystallization, it should be cleaned and drained in time after use to avoid damage when it is restarted. 

Pneumatic Industrial Diaphragm Pump Main Features 

1. No need for irrigation and diversion, it can work submerged in the medium, the suction lift is up to 5m, the lift is up to 50m, and the outlet pressure is ≥6bar.
2. The flow is spacious and the passing performance is good, the maximum particle diameter allowed to pass is 10mm. When pumping mud and impurities, there is little wear on the pump.
3. Head and flow can be adjusted steplessly through the opening of the air valve (the air pressure can be adjusted between 1-7 bar).
4. The pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts of the pump and the workpiece medium, and the transported medium will not leak out.
5. Simple structure, less wearing parts, the pump is simple in structure, easy to install and maintain.
6. Can transport viscous liquid (viscosity below 10,000 centipoise).
7. The pump does not need to be lubricated with oil, even if it is idling. It has no effect on the pump, which is the biggest feature of the pump.
8. Easy to use, reliable work, just open and close the gas valve to start and stop.

Pneumatic Industrial Diaphragm Pump Performance Parameter Table

Huatao Supply The Spare Parts For All Kinds of Pump

Huatao Pumps Application

Huatao Pumps Package, Shipment, Workshop

Exhibition And Customer Visting

Please ask for pump details and price by chris@huataogroup.com, Whatsapp: 0086 137 0329 5214.

For any questions will reply within 24 hours.