Product Pictures:

KSV08-47CL-0-N dual coils on/off control 4 way 3 position solenoid valve for hydraulic system

Working principle:
KSV08-47CL-0-N presets oil flow to any oil port. When coil 1 is energized, oil is allowed to flow from ③ to ④, and from ② to ①. When coil 2 is energized, oil flows from ③ to ②, and from ④, the oil return oil with increased flow rate should be directed into the oil port ②. Although the oil port ① can be fully pressurized, it cannot control the oil inlet of the valve. Emergency manual control option operation method: During emergency operation, push the knurled handle to control the function of coil 2 (S2), or pull the knurled handle to control the function of coil 2 (S2). The flower handle can control the function of coil 1 (S1).

Characteristics:
Rated pressure: 315 bar, maximum pressure of 1 port is 210Bar,
Rated flow: 11.4L/Min
Leakage volume: 164 ml/Min maximum at 210 bar
Temperature range: -40°C to 120°C, standard nitrile rubber seal
Coil rated load: Continuous operation within 85% to 115% of rated voltage range
Coil initial current at 20°C: Standard coil: 1.67 A at 12 VDC, Type E coil: 1.7 at 12 VDC
Amperes; 0.85 A at 24 VDC
Minimum pick-up voltage: 80% of rated value at 315 bar
Medium: Mineral oil with viscosity between 7.4~420cSt (50~2000ssu) or synthetic oil with lubricating effect
Weight: 0.43Kg
Installation torque: maximum 27Nm, installation hexagon: S24
Valve hole: VC08-4;

Product technical data:

Product real pictures :

Company Exhibitions:

Our Certificate:

Product processing procedures:

Our new factory and workshop :

Our warehouse:

Shipment:

Different Series of Product , more details please contact us directly:

Hydraulic valves:

Welcome your visit and inquiry !