316L Stainless Steel Pressure Sensor With Compensated Oil-filled Sensor Pressure Transducer Cell
Price:
20
MOQ:
5
Delivery Time:
Negotiable
Brand:
HT SENSOR
Product Description
316L stainless steel with compensated oil-filled sensor pressure transducer
HT15V Silicon Piezoresistive Pressure Sensor
Introduction:
HT15V is a silicon piezoresistive pressure sensor that integrates a highly stable diffused silicon sensing core. Utilizing the piezoresistive effect of diffused silicon, it provides accurate pressure measurement for both liquids and gases. This sensor is widely used in a variety of applications, such as air compressors and refrigeration systems.
![316L Stainless Steel Pressure Sensor With Compensated Oil-filled Sensor Pressure Transducer]()
![316L Stainless Steel Pressure Sensor With Compensated Oil-filled Sensor Pressure Transducer]()
![316L Stainless Steel Pressure Sensor With Compensated Oil-filled Sensor Pressure Transducer]()
Product Features:
Introduction:
HT15V is a silicon piezoresistive pressure sensor that integrates a highly stable diffused silicon sensing core. Utilizing the piezoresistive effect of diffused silicon, it provides accurate pressure measurement for both liquids and gases. This sensor is widely used in a variety of applications, such as air compressors and refrigeration systems.
Product Features:
- Utilizes advanced technology and is encapsulated in a 316L stainless steel housing
- Wide measuring range 0~350KPa~60MpaS
- High reliability and excellent stability
- Constant voltage supply
- Suitable for measuring non-corrosive gas and liquid pressure with 316L stainless steel compatibility
- Compact design, ideal for applications with limited space
- Used in process control systems for monitoring and controlling pressure
- Commonly used in refrigeration systems and air compressors for pressure measurement
- Power Supply: ≤10VDC
- Common Mode Voltage Output: 50% of the input (typical)
- Input Impedance:4KΩ~20KΩ
- Output Impedance:2.5KΩ~6KΩ
- Electrical Connection:100mm high-temperature wire,ribbon cable
| Performance Parameters: | |||||
|---|---|---|---|---|---|
| Measurement Range | Gauge(G) | 350KPa,1000KPa,2000Kpa | |||
| Absolute(A) | 350KPaA,700KPaA,1000KPaA,2000KPaA | ||||
| Sealed(S) | 3500KPaS,7MPaS,10MPaS | ||||
| Typ | Max | Unit | |||
| NonLinearity | ±0.15 | ±0.3 | %F.S | ||
| Repeatability | 0.05 | 0.1 | %F.S | ||
| Hysteresis | 0.05 | 0.1 | %F.S | ||
| Zero Offset Output | 0±1 | 0±2 | mV | ||
| Full Scale Output | 100±1 | 100±2 | mV | ||
| Zero Offset Temp. Drift | ±0.8 | ±2 | %F.S | ||
| Full Scale Temp. Drift | ±0.8 | ±2 | %F.S | ||
| Compensated Temp. | 0~70 | ºC | |||
| Operating Temperature | -20~80 | ºC | |||
| Storage Temperature | -40~125 | ºC | |||
| Allowable Overload | Take the smaller value between 3 times the full scale or 80MPa | ||||
| Burst Pressure | 5X the full scale | ||||
| Long-term Stability | 0.2 % | F.S/Year | |||
| Diaphragm Material | 316L | ||||
| Insulation Resistance | ≥200MΩ 100VDC | ||||
| Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | ||||
| Shock | 100g,11ms | ||||
| Response Time | ≤1ms | ||||
| O-ring Seal | Nitrile rubber or Fluoro rubber | ||||
| Filling Medium | Silicon Oil | ||||
| Weight | ~20g | ||||
| The parameters are tested under the following conditions: 10V @25ºC | |||||
| Outline Construction | |
| Dimension |  |
| Electrical connection and compensation |
 |
| Selection Examples |
| Ordering tips |
1. During assembly, ensure proper fit between the core and transmitter housing to meet all sealing specifications.
2. When installing the housing, maintain vertical alignment and apply even pressure to prevent jamming or damage to the compensation plate.
3. If the medium being measured is incompatible with the core diaphragm or housing material (316L), please specify this clearly when placing the order.
4. Do not press on the sensor diaphragm with hands or sharp objects, as deformation or puncture may damage internal components.
5. Keep the pressure port of the gauge core vented to the atmosphere, and prevent moisture, steam, or corrosive media from entering the negative pressure chamber.
6. In case of any changes to pin wiring, always refer to the actual label on the chip for correct connections.
| Q&A |
1.Q: What are the features of your pressure sensor transmitters?
A: High precision, durability, and excellent performance. Customization available.2.Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service3.Q: What is your production capacity?
A: Our manufacturing facilities can produce up to 30,000 pressure sensor transmitters per month, so we are fully capable of meeting the needs of large-scale orders. However, it is advisable to contact our sales team in advance to ensure smooth production and delivery scheduling.
4.Q: What's the typical delivery period?
A: 5~8 working day for standard models. Customized products may vary.5.Q: How are the products priced? Any discounts?
A: Competitive pricing with discounts for bulk orders or long-term partners.
6.Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 24 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Baoji Hengtong Electronics Co., LTD
Location
Building 4, No.195, Gaoxin Avenue, Weibin District, Baoji City, Shaanxi Province, China
Contact Person
Merlin