10VDC Power HT24V Silicon Pressure Sensor Cell G1/2 Level Sensor Flush Pressure Sensor Core
Price:
30
MOQ:
5
Delivery Time:
Negotiable
Brand:
HT SENSOR
Product Description
10VDC Power HT24V Silicon Pressure Sensor Cell G1/2 Level Sensor
Product Overview
The HT24V is a flush diaphragm pressure sensor equipped with a highly stable diffused silicon chip. Its innovative design transmits pressure to the sensitive chip through a stainless steel diaphragm, protected by sealed silicon oil. The flush diaphragm structure enhances cleaning ease and contributes to exceptional reliability, making it ideal for applications in food, hygiene, and other industries requiring stringent cleanliness and accuracy standards.
Key Features
- Advanced technology with 316L stainless steel housing and premium diaphragm materials including titanium and Hastelloy
- Thick-film circuits for temperature compensation and zero-point correction
- Outstanding reliability, repeatability, and stability
- Flush diaphragm structure for easy cleaning and maintenance
Applications
- Measurement of non-corrosive gas and liquid pressure with 316L stainless steel compatibility
- Food and beverage industry processing
- Industrial process control systems
- Pharmaceutical manufacturing applications
Electrical Performance
- Power Supply: ≤10VDC
- Common Mode Voltage Output: 50% of the input (typical)
- Input Impedance: 4KΩ~20KΩ
- Output Impedance: 2.5KΩ~6KΩ
- Electrical Connection: 100mm high-temperature wire, paper ribbon cable
Technical Specifications
| Measurement Range | Gauge(G) | 10KPa, 20KPa, 35KPa, 100KPa, 200KPa, 350KPa, 1000KPa, 2000KPa | |
|---|---|---|---|
| Absolute(A) | 100KPaA, 200KPaA, 350KPaA, 700KPaA, 1000KPaA, 2000KPaA | ||
| Sealed(S) | 3500KPaS, 7MPaS, 10MPaS, 20MPaS, 35MPaS | ||
| Parameter | Typ | Max | Unit |
| Nonlinearity | ±0.15 | ±0.3 | %F.S |
| Repeatability | 0.05 | 0.1 | %F.S |
| Hysteresis | 0.05 | 0.1 | %F.S |
| Zero Offset Output | 0±1 | 0±2 | mV |
| Full Scale Output (≤20KPa) | 50±1 | 50±2 | mV |
| Full Scale Output (≥35kPa) | 100±1 | 100±2 | mV |
| Zero Offset Temp. Drift (≤20KPa) | ±1 | ±2.5 | %F.S |
| Zero Offset Temp. Drift (≥35kPa) | ±0.8 | ±1.5 | %F.S |
| Full Scale Temp. Drift (≤20KPa) | ±1 | ±2 | %F.S |
| Full Scale Temp. Drift (≥35kPa) | ±0.8 | ±1.5 | %F.S |
| Compensated Temp. (≤20KPa) | 0~50 | ºC | |
| Compensated Temp. (≥35kPa) | 0~70 | ºC | |
| Operating Temperature | -20~80 | ºC | |
| Storage Temperature | -40~125 | ºC | |
| Allowable Overload | Take the smaller value between 3 times the full scale or 60MPa | ||
| Burst Pressure | 5X the full scale | ||
| Long-term Stability | 0.2 % F.S/Year | ||
| Diaphragm Material | 316L | ||
| Insulation Resistance | ≥200MΩ 100VDC | ||
| Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | ||
| Shock | 100g, 11ms | ||
| Response Time | ≤1ms | ||
| O-ring Seal | Nitrile rubber or Fluoro rubber | ||
| Filling Medium | Silicon Oil | ||
| Weight | ~55g | ||
The parameters are tested under the following conditions: Constant voltage of 10V and ambient temperature of 25ºC
Outline Construction
Electrical Connection and Compensation
Selection Examples
Ordering Tips
- Ensure proper fit between core size and transmitter housing during assembly to achieve required airtightness
- During housing assembly, maintain vertical alignment and apply even pressure to avoid jamming or damaging the compensation plate
- If the measured medium is not compatible with the core diaphragm and housing material (316L), provide special instructions when ordering
- Avoid pressing the sensor diaphragm with hands or sharp objects to prevent damage from deformation or piercing
- Keep the pressure port of the gauge pressure core open to the atmosphere and prevent entry of water, water vapor, or corrosive media into the core negative pressure chamber
- If pin leads require changes, refer to the label on the actual core for proper configuration
Company Information
Frequently Asked Questions
Q: What are the features of your pressure sensor transmitters?
A: High precision, durability, and excellent performance. Customization available.
Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service.
Q: What is your production capacity?
A: Our manufacturing facilities can produce up to 30,000 pressure sensor transmitters per month, so we are fully capable of meeting the needs of large-scale orders. However, it is advisable to contact our sales team in advance to ensure smooth production and delivery scheduling.
Q: What's the typical delivery period?
A: 5~8 working days for standard models. Customized products may vary.
Q: How are the products priced? Any discounts?
A: Competitive pricing with discounts for bulk orders or long-term partners.
Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 24 months after shipment, and our after-sales team will respond to your questions within 24 hours. Remote instruction via PC network is always available.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Baoji Hengtong Electronics Co., LTD
Location
Building 4, No.195, Gaoxin Avenue, Weibin District, Baoji City, Shaanxi Province, China
Contact Person
Merlin