ZT-948 Pedestrian Access Speed Lane Turnstile Gate and Elevator Control Linkage Solution
| Attribute | Value |
|---|---|
| Operating voltage | 24V DC |
| Power consumption | 160 W |
| Consumption current | 6.5 A |
| Throughput rate (single passage mode) | 45-65 persons/min |
| Passageway width | 650-900 mm |
| Operating temperature range | -30 °C to +70 °C |
The ZT-948 solution integrates turnstile gates with elevator control systems to create a seamless access experience for office buildings, hospitals, exhibition halls, and commercial spaces. When users authenticate at the turnstile, the system automatically calls the elevator and dispatches it to their designated floor, eliminating manual button operation.
- Enhanced Traffic Flow: Intelligent elevator dispatching reduces wait times and improves movement efficiency
- Optimized Resource Allocation: Dynamic adjustment of elevator operation based on real-time demand
- Advanced Security: Multiple authentication methods (face recognition, card swipe) ensure authorized access only
- Comprehensive Data Tracking: Integrated system records elevator usage patterns for management analysis
- Energy Efficient: Smart operation reduces unnecessary elevator runs for sustainability
- Visitor Management: Contactless access for registered guests with controlled elevator access
- Security Integration: Links with building security systems for enhanced protection
- Operates via RC-panel, WRC, or ACS control systems
- 24V safe voltage with maximum 160W power consumption per passage
- Two-level infrared sensor system (14 upper pairs, 28 lower pairs)
- Supports multiple consecutive authorized passages without panel closure
- Four panel versions for different passage widths (600-1000mm) and heights
- Customizable front panels for integration with various authentication devices
- Expandable passage lanes with STD-01 double-sided sections
- Built-in proximity card readers with 40mm minimum reading range
- Visual passage indicators with backlit pictograms and directional lighting
- Fire alarm integration for emergency passage opening
- Dual control modes (pulse and potential) for standalone or ACS operation
| Model | ZT-948 |
| Size | 1500×120×1050mm |
| Material | 1.5mm SUS304 stainless steel with 12mm black marble top |
| Pass Width | 600mm-800mm |
| Passage Direction | Single/Bi-directional |
| Pass Rate | 35-40 persons/minute |
| Operating Time | 0.2 seconds |
| Power Input | AC100-240V, 50/60HZ |
| Working Voltage | 24V 105W |
| Arm Material | 10mm Acrylic |
| Application | Commercial buildings, Airports, Hotels, Government facilities, Halls |
| Working Environment | Indoor |
| Communication Interface | RS485, Dry contact |
| Mechanism | Brushless Servo Motor + Encoder + Clutch |
| MCBF | 5,000,000 Cycles |
| Light | Cube + 3-color stripes |
The ZT-948 provides multiple interfaces (primarily RS485) for seamless integration with access control and elevator systems. It supports protocol customization for different brand requirements, enabling comprehensive linkage between turnstile operation and elevator dispatch.
Advanced infrared detection zones prevent unauthorized following. The system reacts to tailgating attempts by triggering alarms while maintaining security protocols based on the valid cardholder's position.
- Reverse intrusion detection during door closure triggers continuous alarm
- Unauthorized reverse entry during open state causes immediate door closure
- Opposite direction intrusion during exit activates alarm system
- Close-following detection with 0.25 second response time
- Normal trailing detection closes door and sounds alarm after passage
- High-performance DC servo or brushless drive systems
- Power failure response: door stops in position and becomes freely movable
- Optional 12V battery backup for emergency operation
- Emergency button for channel opening during dangerous situations
- Remote control capability for manual channel closure
- Automatic system reset after power restoration or emergency clearance
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.