Wood Chip Fired Hot Air Generator & Coal And Biomass Hot Air Stove Hot Blast Stove

The RF-Y (Q) series oil (gas) hot air stove uses a burner to burn and produce high-temperature gas. And with the help of a hot air stove with enhanced heat exchange measures, the heat of the high-temperature gas is transferred to the heated air. After heat dissipation, the temperature drops below 250 degrees and is discharged into the atmosphere through an induced draft fan. The air to be heated is forced into the hot blast furnace through an optional blower. After the heat is absorbed, the temperature rises to the rated value and is sent out from the hot air outlet. When the hot air temperature reaches the rated upper limit temperature, the burner will automatically stop combustion or switch to small flame combustion; When the temperature of the hot air drops to the lower limit of the rated temperature, the burner will be reignited or turn into a large fire for combustion, and the speed of temperature increase can be adjusted through the intake valve.