Customer Designed Modified HDPE High Density Poly In Strong Toughness Polyether Modified Additive
Price:
2,000-3,000 USD PER TON
MOQ:
3 ton
Delivery Time:
5-10 DAYS
Brand:
Chongyuan
Product Description
Product Description
HDPE
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion
Properties:
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion
Properties:
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance also is good.
Specification
|
Performance of the project
|
Test condition [condition]
|
The test method
|
The test data
|
The data unit
|
|
|
Basic performance
|
Density mass index
|
|
GB/T 1033
|
0.948±0.002
|
g/cm3
|
|
Density test results
|
|
GB/T 1033
|
0.948
|
g/cm4
|
|
|
Melt flow rate mass index
|
190ºC/5.0kg
|
GB/T 3682
|
0.23±0.03
|
g/10min
|
|
|
Melt flow rate test results
|
|
GB/T 3682
|
0.25
|
g/10min
|
|
|
Melt flow rate mass index
|
190ºC/21.6kg
|
GB/T 3682
|
6.2±1.5
|
g/10min
|
|
|
Melt flow rate test results
|
|
GB/T 3682
|
6.4
|
g/10min
|
|
|
Mechanical properties of
|
Tensile yield strength quality index
|
|
GB/T 1040
|
≥23
|
MPa
|
|
Test results of tensile yield strength
|
|
GB/T 1040
|
27.6
|
MPa
|
|
|
Elongation at break quality index
|
|
GB/T 1040
|
≥600
|
%
|
|
|
Test results of elongation at break
|
|
GB/T 1040
|
804
|
%
|
|
|
Quality index of impact strength of simply supported beam
|
|
GB/T 1043
|
≥25
|
KJ/m2
|
|
|
Test results of impact strength of simply supported beam
|
|
GB/T 1043
|
26.7
|
KJ/m2
|
|
|
Other properties
|
Volatile matter quality index
|
|
GB/T 15658 1
|
≤350
|
mg/kg
|
|
Volatile test results
|
|
GB/T 15658 1
|
Did not check out
|
mg/kg
|
|
|
Biochemical property
|
Cleanliness (color granule) quality index
|
|
SH/T 1541
|
≤20
|
grain/kg
|
|
Cleanliness (color particle) test results
|
|
SH/T 1541
|
0
|
grain/kg
|
|
|
Cleanliness (impurities) quality index
|
|
SH/T 1541
|
≤60
|
grain/kg
|
|
|
Cleanliness (impurities) test results
|
|
SH/T 1541
|
0
|
grain/kg
|
|
Application
1.Fiber ( Carpet, Textils, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,
Toys, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,
Toys, etc.)
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Chongyuan(Xiamen)Fine Chemical Co.,LTD.
Location
Room 1604,No.491,Gaolin Middle Road,Huli District,Xiamen
Contact Person
Donmy