Double Column ASRS Pallet Stacker For Automatic Racking System
Price:
$50000-100000
MOQ:
1
Delivery Time:
30-40 days
Brand:
CLX
Product Description
Double Column AS-RS Stacker for Pallet Pack automatic Racking System with commissioning and After-sales Services
| No | Descriptions | Specifications | ||
| 1 | Type(Single or Double Column) | Customized | ||
| 2 | Rated Load capacity(kg) | 3500kg | ||
| 3 | Total height of shelves (mm) | Customized | ||
| 4 | Total height of equipment-including top rails and brackets(mm) | Customized | ||
| 5 | Upper surface of top beam(mm) | Customized | ||
| 6 | Cargo Dimension(L*W*H)(mm) | Customized | ||
| 7 | Load Capacity(Kg) | Customized | ||
| 8 | Lifting Height (mm) | Customized | ||
| 9 | Horizontal travel | Travel drive type | Variable Frequency Drive (VFD) | |
| Braking method | Frequency converter control and electromagnetic braking | |||
| Travel motor Power(Kw) | Customized | |||
| Positioning mode(X-Axis) | Laser positioning | |||
| X-Axis Positioning Accuracy(mm) | ±5 | |||
| None-load | Speed | 160m/min | ||
| acceleration | Adjustable at 0-0.5m/s2 | |||
| Loaded | Speed | 160m/min | ||
| acceleration | Adjustable at 0-0.5m/s2 | |||
| 10 | Lifting and lowering | Lifting and Lowering mode | The reducer motor drives the drum, which drives the steel wire rope | |
| Braking method | Frequency converter control and electromagnetic braking | |||
| Lifting and Lowering motor power rate (KW) | Customized | |||
| Cargo detection device | Photoelectric sensor detection | Yes | ||
| Mechanical and electrical limit | Yes | |||
| Others | Cargo apperance detection,detection range more than 20mm | |||
| Positioning mode(Y-Axis) | Bar code or QR Code positioning | |||
| Y-Axis Positioning Accuracy(mm) | ±5 | |||
| None-load | Speed | 60m/min | ||
| acceleration | 0.5m/s2 | |||
| Loaded | Speed | 60m/min | ||
| acceleration | Adjustable at 0-0.3m/s2 | |||
| 11 | Cargo Fork | Type | Smooth and no-shaking, customized single/double gripper fork | |
| Positioning mode | Proximity switches and encoders | |||
| Z-Axis Positioning Accuracy(mm) | ±5 | |||
| Fork extension speed | 40m/min | |||
| cycling time (Sec) | 10s | |||
| Cargo Anti-slip device | Yes | |||
| Motor power rate(KW) | Customized | |||
| 12 | Installation device and function | Fault alarm function | Yes | |
| Fault self diagnosis function | Yes | |||
| X-axis braking deceleration function | Yes | |||
| X-axis braking stop device | Yes | |||
| X-axis safety brake system | Yes | |||
| Y-axis braking deceleration function | Yes | |||
| Y-axis braking stop device | Yes | |||
| Y-axis steel rope tension detection device | Yes | |||
| Y-axis overspeed fall prevention system | Yes | |||
| Anti impact device for top rails and ground rails | Yes | |||
| Anti personnel entry device (fence) | Yes | |||
| Emergency stop device on the machine | Yes | |||
| Upper and terminal emergency stop | Yes | |||
| Emergency stop of safety door electromechanical interlocking | Yes | |||
| safety distances | There is a safe distance from the mechanical stop on X,Y and Z axis. | |||
| 13 | Anti interference and other functions | Wireless | All cables use a 128P or upper copper mesh shielding laye | |
| Many stackers work at same time | Using filters, to filter out harmonics | |||
| Others | Install magnetic rings below the converter, to enhance anti-interference ability | |||
| Self learning (manual debugging) correction function for partial tilt of shelves | X,Y,Z axis all use laser or encoder positioning, so the deviation can be corrected by manually adjusting the parameters | |||
| Speed control | S-Curve,so as to make the speed changes of the stacker crane not only smooth during the acceleration and deceleration process, but also balance the acceleration and deceleration changes |
|||
| Overload protection function | Yes | |||
| Anti cargo fork top plate dropping function | Yes | |||
| (Inventory) Location detection function | Yes | |||
| (Pickup) Over limit detection function | Yes | |||
| 14 | Communication | Infrared optical communication | ||
| 15 | Infrared communication parameter indicators | Equipped with an internal laser calibration auxiliary device, running parallel to the optical axis, without reflective surface interference | ||
| Working scop:100-120000mm | ||||
| Light source: laser, infrared | ||||
| Frequency:F3 | ||||
| Effective opening angle of transmitter:1° | ||||
| Transmission speed:100M bit/s | ||||
| Interface type:PROFINET IRT, Ethernet,PROFIsafe over PROFINET | ||||
| 16 | Communicate with WMS | Ethernet | ||
| 17 | Interlocking function with conveyor | External development and program networking interlocking | ||
| 18 | Control method | SIMENS PLC | ||
| 19 | HMI Language | Chinese | ||
| 20 | Working type | Single and recycled | ||
| 21 | Power supply | AC 380V/50Hz,3 Phase 4 wires,on top rail and corss bean, | ||
| 22 | Noise (high speed) | Less than 80dB | ||
Transition Rail for Stacker
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Guangdong Changlianxin Intelligent Equipment Co.,Ltd
Location
Floor 1, Building B2, Pukyo Waywo Park, No 17, Sha Bian Road, Torch Development Area, Zhongshan Guangdong, China 528437
Contact Person
Simon