soft starter 3 phase 100hp 75KW for AC motor
Price:
$576.00/boxes 1-1 boxes
MOQ:
Negotiable
Delivery Time:
Negotiable
Brand:
SHCKELE
Product Description
Product Description
Model | Overall dimension(mm) | Install dimension(mm) | Drawing | ||||||||
A | C | E | B | D | d | ||||||
5.5KW-55KW | 152 | 292 | 215 | 92 | 269 | M6 | 1 | ||||
75KW-110KW | 274 | 408 | 260 | 160 | 385 | M8 | 2 | ||||
132KW-315KW | 440 | 530 | 290 | 320 | 530 | M8 | 3 | ||||
Feature List | Optional soft start curve | Adaptive control |
Constant current | ||
Current ramp | ||
Optional soft stop curve | Taxi stop | |
Timed voltage ramp soft stop | ||
Adaptive control | ||
Brake | ||
Extended input and output options | Remote control input (3 fifixed inputs, 2 programmable inputs) | |
Relay output (1 fifixed output, 3 programmable outputs) | ||
Analog output | ||
Built-in PT100 RTD input | ||
Optional expansion card | ||
Easy-to-read display shows comprehensive feedback | Removable operation panel | |
Multilingual feedback | ||
Event record with date and time stamp | ||
Working counter (starting times, running hours,kilowatt hours) | ||
Performance monitoring (current, voltage, power factor, kilowatt hours) | ||
User-programmable monitoring screen | ||
Customizable protection | Motor overload | |
Start-up timeout | ||
Under current | ||
Transient overcurrent | ||
Current imbalance | ||
Power frequency | ||
Input trip | ||
Motor thermistor | ||
Power circuit | ||
Phase sequence | ||
Models that meet all your connectivity needs | 23A-1600A (rated) | |
200VAC-440VAC | ||
380VAC-690VAC | ||
Internal bypass selection | ||
Star connection or delta connection | ||
Advanced application optional features | Input / output extension | |
RTD and ground fault protection | ||
DeviceNet, Modbus, Profifibus, Ethernet (Ethernet IP, Modbus TCP, Profifinet) or USB communication module |
The Quick Setup menu allows you to quickly confifigure the soft starter for common applications. The soft starter selects the parameters related to the application and recommends typical settings. You can adjust each parameter according to your actual needs.
Always set parameter 1A, the rated current of the motor to match the rated current indicated on the motor plate. The recommended value is the minimum rated current of the starter.
On the screen, the highlighted value is the recommended value, and the value marked with is the loaded value.
——————————————————————————————————————————————————————————————
*Application：Centrifugal pump
-Parameter：Motor rated current ；Starting method ；Adaptive starting curve ；Start ramp time ；Stop mode ；Adaptive；stop curve ；Stop time
-Suggested Value：Depending on model ；Adaptive Control ；Early acceleration ；10 seconds ；Adaptive Control ；Deceleration ；15 seconds。
*Application：Submersible pump
-Parameter：Motor rated current ；Starting method ；Adaptive starting curve ；Start ramp time ；Stop mode ；Adaptive；stop curve ；Stop time
-Suggested Value：Depending on the model. ；Adaptive Control ；Speed up early. ；5 seconds ；Adaptive Control ；After decelerating. ；5 seconds。
*Application：Damped fan
-Parameter：Motor rated current ；Starting method ；Current limit
-Suggested Value：Depending on model；Constant current；350%
* Application：Undamped fan
-Parameter：Motor rated current ；Starting method ；Adaptive starting curve ；Start ramp time ；Starting limit time ；Locked rotor time
-Suggested Value：Depending on model ；Adaptive Control ；Constant acceleration ；20 seconds ；30 seconds ；20 seconds
* Application：Screw compressor
-Parameter：Motor rated current ；Starting method ；Start ramp time ；Current limit
-Suggested Value：Depending on model；Constant current；5 seconds；400%
*Application：Reciprocating compressor
-Parameter：Motor rated current ；Starting method；Start ramp time ；Current limit
-Suggested Value：Depending on model ；Constant current ；5 Second ；450%
*Application：Conveyor belt
-Parameter：Motor rated current ；Starting method ；Start ramp time ；Current limit ；Stop mode ；Adaptive stop curve ；Stop time
-Suggested Value：Depending on model ；Constant current ；5 seconds ；400% ；Adaptive Control ；Constant deceleration. ；10 seconds
*Application：Rotary crusher
-Parameter：Motor rated current ；Starting method ；Start ramp time ；Current limit ；Starting limit time ；Locked rotor time
-Suggested Value：Depending on model ；Constant current ；10 seconds ；400% ；30 seconds ；20 seconds
*Application：Jaw Crusher
-Parameter：Motor rated current ；Starting method ；Start ramp time ；Current limit ；Starting limit time ；Locked rotor time
-Suggested Value：Depending on model ；Constant current ；10 seconds ；450% ；40 seconds ；30 seconds
Always set parameter 1A, the rated current of the motor to match the rated current indicated on the motor plate. The recommended value is the minimum rated current of the starter.
On the screen, the highlighted value is the recommended value, and the value marked with is the loaded value.
——————————————————————————————————————————————————————————————
*Application：Centrifugal pump
-Parameter：Motor rated current ；Starting method ；Adaptive starting curve ；Start ramp time ；Stop mode ；Adaptive；stop curve ；Stop time
-Suggested Value：Depending on model ；Adaptive Control ；Early acceleration ；10 seconds ；Adaptive Control ；Deceleration ；15 seconds。
*Application：Submersible pump
-Parameter：Motor rated current ；Starting method ；Adaptive starting curve ；Start ramp time ；Stop mode ；Adaptive；stop curve ；Stop time
-Suggested Value：Depending on the model. ；Adaptive Control ；Speed up early. ；5 seconds ；Adaptive Control ；After decelerating. ；5 seconds。
*Application：Damped fan
-Parameter：Motor rated current ；Starting method ；Current limit
-Suggested Value：Depending on model；Constant current；350%
* Application：Undamped fan
-Parameter：Motor rated current ；Starting method ；Adaptive starting curve ；Start ramp time ；Starting limit time ；Locked rotor time
-Suggested Value：Depending on model ；Adaptive Control ；Constant acceleration ；20 seconds ；30 seconds ；20 seconds
* Application：Screw compressor
-Parameter：Motor rated current ；Starting method ；Start ramp time ；Current limit
-Suggested Value：Depending on model；Constant current；5 seconds；400%
*Application：Reciprocating compressor
-Parameter：Motor rated current ；Starting method；Start ramp time ；Current limit
-Suggested Value：Depending on model ；Constant current ；5 Second ；450%
*Application：Conveyor belt
-Parameter：Motor rated current ；Starting method ；Start ramp time ；Current limit ；Stop mode ；Adaptive stop curve ；Stop time
-Suggested Value：Depending on model ；Constant current ；5 seconds ；400% ；Adaptive Control ；Constant deceleration. ；10 seconds
*Application：Rotary crusher
-Parameter：Motor rated current ；Starting method ；Start ramp time ；Current limit ；Starting limit time ；Locked rotor time
-Suggested Value：Depending on model ；Constant current ；10 seconds ；400% ；30 seconds ；20 seconds
*Application：Jaw Crusher
-Parameter：Motor rated current ；Starting method ；Start ramp time ；Current limit ；Starting limit time ；Locked rotor time
-Suggested Value：Depending on model ；Constant current ；10 seconds ；450% ；40 seconds ；30 seconds
Certifications
More Products
Product packaging
Customer Photos
FAQ
Can you provide price sheet and catalog to me ?
We are pleasure to provide these to you for reference,you can cotact me,give me your emails ID.
Can you send me a sample?
It's my honor to send a sample to you,but you need to pay the sample fee and shipping cost
What's about your delivery time?
All type we have stock,after we receive payment,we will send you within two days.
How to pay it?
You can pay it to Alibaba,Paypal,bank.
How about your warrantly time?
Our warrantly time is 12months,if the goods or accessories can't work,we send new one to you.
We are pleasure to provide these to you for reference,you can cotact me,give me your emails ID.
Can you send me a sample?
It's my honor to send a sample to you,but you need to pay the sample fee and shipping cost
What's about your delivery time?
All type we have stock,after we receive payment,we will send you within two days.
How to pay it?
You can pay it to Alibaba,Paypal,bank.
How about your warrantly time?
Our warrantly time is 12months,if the goods or accessories can't work,we send new one to you.
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
VR
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shanghai Hongzhu Power Supply Technology Co., Ltd.
Location
168 Changxiang Road, Nanxiang Town, Jiading District, Shanghai, China
Contact Person
shen