SV-PSM curing agent is a nano-scale waterborne inorganic concrete sealing curing agent, formulated through special technology. It provides deep penetration crystallization that enhances concrete durability without surface film-forming.

• Deep penetration crystallization technology
• Enhanced wear resistance and chemical corrosion resistance
• Improved aging resistance and surface hardness
• Water-based compound - non-toxic, odorless, non-flammable
• TVOC levels far below national standards
• Forms a 3-9mm three-dimensional network structure within concrete

Ideal for various hard floor surfaces including:

• Concrete flooring
• Terrazzo floors
• Emery floors
• Cement floors
• Epoxy floors

• Hard and wear-resistant surface
• Effective sealing and dustproofing
• Excellent acid and alkali resistance
• Bright, non-slip finish
• Strong penetration without alkali return or whitening
• Environmentally friendly formulation

Dilution Ratio: 1:8-1:9 with water (non-alkaline)

Application Rate: Approximately 0.3-0.35kg/㎡ for new floors/walls

1. Clean floor thoroughly before application

2. Spray diluted solution evenly across surface

3. Maintain moisture for 30-40 minutes

4. Allow to dry before second application

5. Repeat process based on required intensity

For walls: Use combination of horizontal and longitudinal spraying

• Avoid application during midday sun to prevent rapid drying
• Repeat soaking process for surfaces requiring additional strength
• Ensure even distribution to prevent pooling

Packaging: 25kg/bag, 1ton/bag or customized options available

Storage: Keep in cool, dry place

Shelf Life: 12 months