PHJ-15 H Beam Welder 3 In 1 Q235 H Beam Welding Machine 0.2 - 1.2m/Min

PHJ-15 H beam 3 in 1 welding machine

1. Introduction

H beam combination work station is the special equipment for the H beam steel production, mainly used for H beam assembling, welding and straightening. It centralizes the function of the assembling machine, welding machine and straightening machine on one combination machine. It can save the time during work-piece transport and space of the work place, also can improve the annual output of unit-area. PHJ type H beam combination work station is new type equipment with high efficiency in the process of H beam production.

2. technical parameters

● H beam web height: 200-1500mm

● H beam web thickness: 6-30mm

● H beam flange width: 200-800mm

● H beam flange thickness: 6-40mm

● H beam length: 4000-15000mm

● H beam material: Q235 (tensile strength ≤235MPa)

● Tapered H beam: less than 8° is acceptable

● Welding joints height: 4-8mm

● Welding wire diameter: 2.5mm or 3.0mm

● Welding speed adjustable range: 0.2-1.2m/min

● Input conveyor: 1 set power conveyor, 2 sets idler conveyor

● Output conveyor: 2 sets lifting conveyor, 1 set idler conveyor

● Pull-rod system: 1 set power type and 1 set idler type, 2 pieces of pulling bar

● Submerged arc welder: Huayuan MZ1000 or Lincoln DC1000