200GBASE-LR4 10km QSFP DD Module 10.8W Max Power Consumption For 200G Ethernet
200GBASE-LR4 10km QSFP DD Module, 10.8W Max Power Consumption For 200G Ethernet
This product is a 200Gb/s transceiver module designed for 10km optical communication applications. The design is compliant to IEEE802.3bs 200GBASE-LR4 standard. The module converts 8 input channels(ch) of 25Gb/s electrical data to 4 channels of LWDM optical signals, and multiplexes them into a single channel for 200Gb/s (PAM4) optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 200Gb/s(PAM4) input into 4 LWDM channels of signals, and converts them to 8 channels output electrical data.
Key Features
- IEEE802.3bs compliant
- QSFP-DD MSA compliant
- 4 LWDM lanes MUX/DEMUX design
- Supports 212.5Gb/s aggregate bit rate
- Up to 10km transmission on single mode fiber (SMF) with FEC
- Operating case temperature: 0 to 70℃
- 200GAUI-4 electrical interface
- Maximum power consumption 10.8W
- LC duplex connector
- RoHS compliant
Application
- Data Center Interconnect
- 200G Ethernet
- Enterprise networking
Product Details
| Parameter | Symbol | Min | Typical | Max | Units | No |
| Operating Case Temperature | TOP | 0 | 70 | degC | ||
| Link Distance with OM3 | D | 0.002 | 10 | km | ||
| Power Consumption | 10.8 | W | ||||
| Center Wavelength | L0 | 1294.53 | 1296.59 | nm | ||
| L1 | 1299.02 | 1301.09 | nm | |||
| L2 | 1303.54 | 1305.63 | nm | |||
| L3 | 1308.09 | 1310.19 | nm | |||
| Average Launch Power,each Lane | PAVG | -3.4 | 5.3 | dBm | ||
| OMA, each Lane | POMA | -0.4 | 5.1 | dBm | ||
| Average Receive Power,each Lane | -9.7 | 5.3 | dBm | |||
| Receive Power(OMA),each Lane | 5.1 | |||||
| Receiver Sensitivity(OMA),each Lane | SEN | max(-7.2,SECQ-8.6) | dBm | For BER of 2.4E-4 |
Innovations
The manufacturing environment is strictly compliant with most advanced technological standards, ensuring our products a long term reliability.
Quality & Assurance
Our Cutting-Edge test equipment verifies that each of our products meets our high-quality standards
Customization
Thanks to the specialists of our Engineering Department, we have full control over both the hardware and the software of all our transceivers. Need your personal labelling? No problem, just ask and we provide!
Multi-Compatibility
ColorOptic offers a true cost-effective solution for all major platforms including the original vendor firmware.
Technical Support
Any issues with your equipment? We are already dispatching an engineer to your premises to fix it. We are 7x24 hours online supports.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.