Single Mode 1G Transceiver 80km 1490nm TX 1550nm RX Transceiver Module Cisco Compatible 1.25GBASE BiDi SFP SC Connector

Cisco Compatible 1.25GBASE BiDi SFP SC connector Single Mode fiber 80km 1490nm TX / 1550nm RX Transceiver Module

Features

• Up to 1.25Gbps bi-directional data links
• 1490nm DFB laser and PIN photo detector for ZK-SFP-1G45S-80
• 1550nm DFB laser and PIN photo detector for ZK-SFP-1G45S-80
• Up to 80km for SMF transmission
• Compliant with SFP MSA and SFF-8472 with single SC receptacle
• Digital Diagnostic Monitoring: Internal Calibration or External Calibration
• Hot-pluggable SFP footprint
• Metal enclosure, for lower EMI
• Compatible with RoHS
• +3.3V single power supply
• Operating case temperature:Standard : 0 to +70°C, Industrial : -40 to +85°C

Application

• Gigabit Ethernet
• Switched Backplane Applications
• Switch to Switch interface
• Switched backplane applications
• Router/Server interface
• Other optical transmission systems

Description

• Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1490nm DFB laser (the 1550nm DFB laser) and the PIN photo-detector. The module data link up to 80KM in 9/125um single mode fiber.

• The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.