Plastic Rings Pp Intalox Super Saddle In Tower Packings PVC PP PE Polypropylene Plastic Super Intalox Saddles Ring
Plastic Rings Pp Intalox Super Saddle
Plastic Rings Pp Intalox Super Saddle
Detailed Descriptions:
Plastic intalox saddle rings are made from heat resistant and chemical resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoide (PVDF). They have the properties of corrosion resistance, high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on.
They are available for stripping, absorbing and washing and the application temperature in media ranges from 60 to 150 °C. They are widely used in the packing towers in petroleum, chemical, alkali chloride, coal gas industries and environmental protection industries.
Physical & chemical properties:
| Performance/Material | PE | PP | RPP | PVC | CPVC | PVDF |
| Density (g/cm3) | 0.94-0.96 | 0.89-0.91 | 0.93-0.94 | 1.32-1.44 | 1.50-1.54 | 1.75-1.78 |
| Operation Temp. ( °C) | 90 | >100 | >120 | >60 | >90 | >150 |
| Chemical Corrosion Resistance | Good | Good | Good | Good | Good | Good |
| Compression Strength (Mpa) | >6.0 | >6.5 | >7.0 | >6.0 | >8.0 | >10.0 |
Main Features:
1. Material: polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoide (PVDF).
2. Corrosion resistance, high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency.
3. This structure helps liquid distribution and enlarges the quantities of gas holes.
4. The plastic intalox saddle rings have little resistance, bigger flux and higher efficiency than the Pall Ring. It is one of the most widely used packings with good hardness
5. We can produce the plastic random packing with different specifications according to customers' requirements.
Technical Data:
| Name | Normal mm |
Diameter*Height* Thickness mm |
Surface area m2/m3 |
Void space % |
Bulk density kg/m3 |
No.elements per/m3 |
Packing factor m-1 |
|
Plastic Intalox Saddle |
ø25 | 25*13*1.2 | 288 | 85 | 102 | 97680 | 467 |
| ø38 | 38*19*1.2 | 265 | 95 | 91 | 25200 | 309 | |
| ø50 | 50*25*1.5 | 250 | 96 | 75 | 9400 | 282 | |
| ø76 | 76*38*3.0 | 200 | 97 | 59 | 3700 | 220 |
The bulk density given here is based on PP material.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.