PSD-60 Endoscopy Processor High-Performance Electrosurgical Unit For Medical
PSD-60 Endoscopy Processor High-Performance Electrosurgical Unit For Medical
1. Parameter of PSD 60 Electrosurgical Unit
| MODEL | Olympus PSD-60 |
| Application scope | Endoscopic and open surgery |
| RF Output | Monopolar and bipolar |
| Frequency | 350-447 Hz |
| Monopolar modes | AUTO CUT 200 W |
| ENDO CUT 200 W | |
| Forced Coag 120 W | |
| Soft Coag 120 W | |
| Argon Plasma Coag 120 W | |
| Bipolar Modes | Soft Coag with an Auto Start 120W |
| Type and degree of protection | Class I, type CF |
| Dimensions | 417 x 165 x 375 mm |
| WEIGHT | 9.7 kg |
Recommendations for Endoscopic Maintenance and Care
-
Do not place the endoscope together with other instruments and avoid touching other parts with the insertion part.
-
Wait until the endoscope angle returns to the 0-degree state before pulling out.
-
Since the insertion part is long, please be careful when cleaning and storing it, and be sure to confirm that it is not stuck beforehand.
-
When sterilizing EVIS endoscopes with ethylene oxide, remove the waterproof cap; when sterilizing other endoscopes with ethylene oxide, put on the ETO cap.
-
Wait until the endoscope angle returns to the 0-degree state, then pull out from the trocar needle and trocar.
-
When adjusting the angle of the insertion part, the angle should not be smaller than the range indicated in the instruction manual.
-
Please keep the sheath as straight as possible during operation.
-
Hold the insert gently and handle it carefully when taking it out.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.