Shear Pin Type Load Cell 2 Ton 6.5t 12t Weighing Load Cell 12 Ton
TEDS 8 Wire Pin Type Load Cell For 2t/6.5t/12t Weighing Applications-WL-162
Product Description:
The WL-162 load pin is designed for a variety of applications such as cranes, winches, hoists, load shackles and bearing blocks. The load pin range covers 2t/6,5t/12t, providing accurate, real-time monitoring of load forces. Forged in high tensile 17-4ph stainless steel, our load pins is built to exacting standards and tested to 150% of normal rated loads. And our load pin comes with TEDS memory to store calibration information for plug-and-play sensors and transmitters and those information can be downloaded to the host controller when needed.
Brans are always devoted to deliver satisfied and favourable services to each our clients to meet their specific needs. We deeply understand that each apllication is different and requires a customized response.
To make sure providing the best solution, the load cell can be adapted to meet customer requirements.
Features and Applications:
- Spins male connector on load cell
- 17-4PH stainless steel with 8 wiring
- The loading direction is opposite to aviation on plug
- Good resistance to corrosion and other chemicals
- Good long-term sustainability and stability
Specifications:
| Capacity | 2t/6.5t/12t |
|---|---|
| Rated output |
1.0±20%mV/V |
| Hysteresis | 0.5%F.S. |
| Zero balance | ±0.03mV/V |
| Non-linearity | ±1%F.S. |
| Ceep(30min) | 0.5%F.S. |
| Temp.effect on output | ±0.5%F.S./10℃ |
| Temp.effect on zero | ±0.5%F.S./10℃ |
| Imput impedance | 780±20Ω |
| Output impedance | 700±5Ω |
| Insulation | ≥5000MΩ/100VDC |
| Recommended excitation | 5-12VDC |
| Compensated temp. range | -10~60℃ |
| Operation temp. range | -20~80℃ |
| Safe overload | 150%F.S. |
| Ultimate overload | 400%F.S. |
| IP class | IP67(Customizable) |
| Cable size | Optional |
| Material | Stainless steel |
Dimension(MM):
Load Direction&Wiring:
Load Cell Packaging and Shipping
To ensure safe arrival at your location, the load cell will be carefully packaged and shipped. The packing process is as follows:
1. The load cell will be placed in a sturdy cardboard box to protect it from external damage during shipping.
2. The box will be filled with foam padding to provide additional cushioning and prevent the load cell from moving during shipping.
3. The load cell will be sealed in a plastic bag to protect it from moisture and other environmental factors.
4. Additional layers of bubble wrap will be provided for additional protection.
5. The carton is securely taped to prevent tampering.
6. A shipping label with your address and product information is attached to the box.
7. The package is shipped using a reliable and trusted freight carrier.
Once the package is shipped, you will receive a tracking number to monitor the status of your delivery. Please ensure that someone is available at the delivery address to receive the package to avoid any delays or problems.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.