Metallic Luster Non Ferrous Additive Waffle Aluminium Titanium Alloy

                                                           Aluminium Titanium Alloy Non Ferrous Additive

Aluminium Titanium Alloy

Performance and purpose:

1. This product is an aluminum titanium intermediate alloy containing 4.5-5.5% titanium (AlTi5), 9.0-11.0% titanium (AlTi10), and 14.0-16.0% titanium (AlTi15). It is used for titanium element addition or grain refinement in aluminum alloy melting, with low addition temperature and low titanium element loss.

2. This product generates a large number of dispersed TiAl3 high melting point particles in the aluminum liquid. During solidification, they act as foreign crystal nuclei to refine the grain structure, thereby improving the strength and plasticity of the aluminum material or casting, and improving the comprehensive mechanical properties.

Usage:

1. Bake and dry before use.

2. Addition temperature: (AlTi5, AlTi10) above 720 ℃, (AlTi15) above 730 ℃.

3. The dosage of this product is determined by calculation and experimentation based on actual conditions.

4. Adding method: Heat up to the required temperature, remove the dross, lightly pour the product into various parts of the aluminum liquid, mix evenly after melting, sample and analyze, and pour after the composition is qualified.

Packaging and storage: Store in a well ventilated and dry place, moisture-proof.

This product is in block or waffle shape, with a metallic luster. The specific specifications are shown in the table below: