Tricycle TUKTUK TAXI Motorcycle Clutch Assembly G4070500 For TVS KING

   The clutch assembly in a tricycle serves the same purpose as in a motorcycle or other vehicles with manual transmissions. It is responsible for engaging and disengaging the power transmission between the engine and the drivetrain. The clutch allows the rider to smoothly start the tricycle from a standstill, change gears, and come to a stop without stalling the engine.

Here are the main components typically found in a tricycle clutch assembly:

   Clutch Disc: The clutch disc is a friction plate that is located between the engine's flywheel and the clutch pressure plate. It has a hub in the center that connects to the transmission input shaft. The clutch disc consists of friction material on both sides, which engages and disengages with the flywheel and pressure plate to transmit power.

  Pressure Plate: The pressure plate is a spring-loaded component that applies pressure to the clutch disc, clamping it against the flywheel. When the clutch pedal is released, the pressure plate holds the clutch disc tightly, allowing power to be transmitted from the engine to the transmission.

   Flywheel: The flywheel is a heavy rotating disk connected to the engine's crankshaft. It provides inertia and smooths out engine vibrations. The clutch disc engages with the flywheel, transferring power from the engine to the transmission.

   Clutch Release Bearing: The clutch release bearing, also known as the throw-out bearing, is a component that engages and disengages the pressure plate from the clutch disc. It is typically located inside the clutch housing and moves along a release fork when the clutch pedal is pressed.

   Clutch Housing: The clutch housing is the enclosure that contains the clutch assembly. It is usually bolted to the engine and houses the clutch disc, pressure plate, and release bearing.