Pouch Cell Final Vacuum Sealing Machine

with Auto Piercing Function

Model: MR-BFZ200

MR-BFZ200 is mainly used for pouch cell vacuuming and second sealing after electrolyte filling.

Features:

1. Head made of copper material, heat transfer effect is good to save power consumption, improve efficiency, energy saving than similar products.

2. The upper and lower head pressure can be adjusted through the regulator to achieve different process parameters.

3. Upper and lower head with cylinder driven by two linear guide sleeve guide, up and down flexible, accurate guidance to ensure product parallelism after sealing requirements

4. With automatic puncturing function, waste recovery unit.

5. Cover cavity driven by the cylinder, guided by a linear guide sleeve, up and down flexible, accurate guide to ensure product sealing requirements

6. Can be applied to different specifications of the product battery, and the adjustment is simple and convenient.

7. Easy to operate, beautiful appearance, small size, light weight.

Specification

Picture for Reference

For completing the full sealing procedure, you may need the following combination:

* A. Compact Heating Sealer (suitable for top & side sealing with tab)

* B. Vacuum Sealing Machine (for pre-sealing in glove box after injection of electrolyte)

* C. Final Vacuum Sealing Machine

(for vacuuming and second sealing with automatic puncture and degassing function)

If you don't want to spend too much budget on the sealing part, machine A plus B can also meet your basic sealing need!

MRBEST Factory Show